Advertisement
CN3
3 Water Temp Thermistor(Wht)
4 Door Sw (Brn)
6 Water Temp Thermistor Gnd. (Org)
7 Water Level Sensor (Vio)
8 Water Level Sensor (Pnk)
CN1 & CN2
PCB Sub (Display)
CN4 AG PCB
1 (Red)
2 (Blu)
3 (Wht)
4 (Grn)
5 (Pnk) Ground
CN8 (Hull Sensor)
1 +5 vdc (Pnk)
2 Sensor Signal (Red)
3 Sensor Signal (Blu)
4 Ground (Org)
Water Temperature Thermistor Check
Connector CN 3 Pin 3 (White) and CN3 Pin 6
(Orange)
Door Switch Check
Connector CN3 pins #6(Org) & # 4(Brn)
Water Level Sensor Check
Voltage: Connector CN 3 pins #6(Org) & # 7(Vio)
And Connector CN 3 Pins #6(Org) & #8(Pnk)
Resistance: Connector CN 3 Pin 8 (Pink) and CN7
Pin 7 (Violet)
Hall Sensor Check
Connector CN8 pins #4(Org) & # 2(Red) additionally
4(Org) & # 3(Blu)
Motor Check
Connector CN9 Pin 1 (Blue), Pin 2 (White) and Pin
3 (Red)
A/C Power Check
Connector CN 5 Pins 1 (White) and 3 (Blue)
# tsWF306 RevD 03/21/2011
CN11 (MEMS PCB)
1 (Blu)
2 (Wht)
3 (Yel)
4 (Org)
5 (Pnk)
CN10
1 Main Valve (Blu)
2 Hot Valve (Red)
3 Pre Cold Valve (Yel)
4 Bleach Valve (Pnk)
6 Drain Pump (Blk)
7 Door Lock Close (Sky)
8 Door Lock Open (Wht)
Operating voltage at Room temperature
-
2.5VDC (5VDC May indicate a connector
issue)
5VDC Door Open, 0VDC Door Closed
Operating voltage at no water in the
drum-
2.5VDC
Manually spin the drum to see the volt-
age change, Power On
0Vdc or 3.75Vdc
Power Off 11.5Ω across Pins 1-2, Pins 1
-3, & Pins 2-3
Power On 120VAC
CN7
1 Silver Care (Wht)
2 Door Lock & Valve common (to L)(Blk)
CN5
1 AC Pwr (N) (Wht)
3 AC Pwr (L) (Blu)
CN9
1 Motor Pwr U Phase (Blu)
2 Motor Pwr V Phase (Wht)
3 Motor Pwr W Phase (Red)
Test 1
Test 1
Test 1
Test 1
Test 1
Test 1
RY9 Washer Heater Relay
1 Heater (Red)
2 (N) (Wht)
Test 2
Operating Resistance at Room
Temperature (Power off) discon-
nect CN3
12kΩ-14kΩ
Test 2
Operating Resistance with
power off
open with door open, short with
door closed.
Test 2
Operating Resistance (Power
off)
CN3 Pin 8 (Pink) and Pin 7
(Violet) 22- 24Ω
Test 2
N/A
Test 2
N/A
Test 2
N/A
3
Advertisement
