Page 1
Operator’s Manual 2 Ton Aluminum / Steel Vehicle Jack Model 4809 CUSTOMER HELP LINE Parts and Questions 1-888-332-6419 8:00 AM - 4:45 PM Central Time Monday- Friday WARNING: Before using this product, • Safety read this Operator’s Manual and follow •...
Page 2
AIR PURGE PROCEDURE IMPORTANT: BEFORE FIRST USE, perform the following Air Purge Procedure to remove any air that may have been introduced into the hydraulic system as a result of product shipment and handling. ASSEMBLE AND INSERT HANDLE PURGE AIR See ASSEMBLY on page 4 to assemble With a flat blade screwdriver, handle.
DESCRIPTION Do Not Overload Jack Do not overload this jack beyond its rated Craftsman model 4809 features a 4,000 lbs. capacity. Overloading this jack beyond its maximum capacity. Lifting range for this jack rated capacity can cause damage to or failure is 3.87 inches to 18 inches.
Page 4
FRONT OF THE JACK PICTURE 1 PICTURE 2 Bottom handle Saddle Handle Socket Screw Lower Handle Upper Handle Quick Front Wheels Lifting Arm Disconnect BACK OF THE JACK Handle PICTURE 3 Handle Socket Screw Rubber Block Pump Plunger Rear Swivel Casters POWER UNIT •...
• Pump jack handle until saddle nears contact To Replace Oil: with vehicle lifting point. Check to see that the • Fully open release valve by turning handle saddle is centered and will contact lifting point counterclockwise as far as it will go. firmly.
EXPLODED VIEW AND PARTS LIST Oil fill screw Description Qty. Saddle Lift Arm Side Plate Assembly Front Wheel Rear Caster Assembly Handle Handle Socket Power Unit Assembly TROUBLESHOOTING Symptom Poor jack Handle Jack will Jack will Jack will Jack will lifting, raises by not lift...
Page 8
For Help Line, Parts and Service: Call 8:00 am - 4:45 pm, CT, Monday - Friday 1-888-332-6419 Para la linea de ayuda, partes y servicio: Llame de 8:00 am - 4:45 pm, CT, Lunes-Viernes 1-888-332-6419...