Table of Contents
Advertisement
Playing a CD
When the CD load indicator turns
4.
green and ''LOAd'' appears in the
screen again, insert the next CD in
the slot.
5.
Repeat this until all six positions
are loaded. If you are not loading
all six positions, the system begins
playing the last CD loaded.
You can also load a CD into an empty
position while a CD is playing by
pressing the appropriate side of a
preset bar or touching a disc icon.
The system stops playing the current
CD and starts the loading sequence.
It plays the CD just loaded.
You operate the CD changer with
the same controls used for the radio.
The numbers of the disc and track
playing are shown in the display. On
vehicles with navigation system,
these numbers also appear in the
upper display.
138
Comfort and Convenience Features
On vehicles with in-dash CD changer
To select a different disc, press the
appropriate side of a preset bar (1
6) or use the Preset 5 (DISC
select the previous disc or Preset 6
(DISC
＋
) to select the next disc in
sequence. On vehicles with
navigation system, touch the
appropriate disc icon or press the
or
side of the CH/DISC bar. If
▼
you select an empty position in the
CD changer, the system will try to
load the CD in the next available slot.
For Vehicles without Navigation
System
SEEK/SKIP
Each time you
−
press and release
side, the
player skips forward to the
beginning of the next track. Press
and release
side, to skip
backward to the beginning of the
current track. Press it again to skip
to the beginning of the previous
track.
To move rapidly within a track, press
and hold the
−
) to
SCAN
The SCAN function
−
−
samples all the tracks on the
selected disc in the order they are
recorded on the CD. To activate it,
press and release the SCAN button.
You will see SCAN in the display.
▲
You will get a 10 second sampling of
each track on the selected CD. Press
the SCAN button again to get out of
the system.
Except for LX model
D-SCAN
This function samples
−
each first track of all the discs in the
in-dash CD changer in the order they
are stored. To activate it, select the
D-SCAN mode by pressing and
holding the SCAN button. You will
see D-SCAN in the display. You will
get a 10 second sampling of the first
track on each CD. Press the SCAN
button again to get out of the system.
or
side.
Advertisement
Table of Contents
