Table of Contents
Advertisement
On vehicles with navigation system
If you want to adjust the sound while
the radio/CD is playing, push the
AUDIO DISPLAY button, then touch
the SOUND icon in the display.
These two
Balance/Fader
−
modes adjusts the strength of the
sound coming from each speaker.
BAL adjusts the side-to-side strength,
while FAD adjusts the front-to-back
strength.
Treble/Bass
−
Use the TRE/BAS
modes to adjust the tone to your
liking.
On vehicles without navigation system
Each mode is shown in the display as
it changes. Turn the VOLUME knob
to adjust the setting to your liking.
When the level reaches the center,
you will see ''
'' in the display.
With Navigation System
BASS ADJUST ICONS
On vehicles with navigation system
Touch the arrows next to the BAS or
TRE icons. The adjustment shows
you the current setting. Touch the
left or right bars on the sound grid.
Balance is equalized when the
vertical lines are centered on the
grid. Touch the front or rear bars on
the sound grid. The fader is
equalized when the horizontal lines
are centered on the grid.
SOUND GRID
FADER ADJUST ICONS
TREBLE ASJUST ICONS
The system will automatically return
the display to the selected audio
mode about five seconds after you
stop adjusting a mode. On vehicles
with navigation system, touch the
RETURN icon to go back to the
audio screen.
Comfort and Convenience Features
Playing the Radio
BALANCE
ADJUST ICONS
RETURN ICON
125
Advertisement
Table of Contents
