Pantone PT-BS006Y Instructions

DIGITAL CLOCK WITH BLUETOOTH SPEAKER
MODELS: PT-BS006Y, PT-BS006N, PT-BS006P, PT-BS006L

PRODUCT OVERVIEW

1 2 3 4 5 6
1. (alarm 1) : press to turn alarm 1 on.
Press again to turn the alarm off. Press
and hold to set the clock/alarm.
2. (alarm 2) : press to turn alarm 2 on.
Press again to turn the alarm off. Press
and hold to set the clock/alarm.
3. (MODE) button : press to switch
between different input modes.
4. : press to play the previous song.
5. : press to play the next song.
6. : press to play/pause song.
•
Press and hold to turn the product on. Press and hold again to turn the product off.
•
Press the button twice to turn the LED knob light on/off.
7 LED display
8. (Alarm 1) : lights up when 1st alarm is set.
9. (Alarm 2) : lights up when 2nd alarm is set.
10. BT indicator: lights up when connected to a Bluetooth device.
11. TF (Micro SD) indicator : lights up when a Micro SD card is
inserted into the TF card port.
12.
13. Volume control knob : rotate the knob clockwise to increase
volume. Rotate the knob anticlockwise to decrease volume.
14. TF Card/Micro SD card slot: insert your Micro SD card to play
the songs stored in your Micro SD card.
15. Charging LED indicator
16. USB-C port: use the supplied USB-C charging cable to charge the product.

OPERATION

Power on and charging

Before rst time use, charge the product using the supplied USB-C charging
cable. Plug the cable into the USB-C port on the product and the other end to
a power source. Charge for 2 hours.
Press and hold the

Setting the time

Press and hold the
ash on the LED display. Use the
Press the
display. Use the
Press and hold the
To reset time settings, rst delete the alarm settings.

Alarm settings

Press the button to enter 1st alarm. Press and hold the
hour number on the LED display will ash. Use the
Press the button again and the minutes number on the LED display will ash.
Use the /
alarm is on.
Press the button again to enter the ringtone selection. There are 5 ringtones to
choose from. Use the
Press and hold the
For the 2nd alarm, repeat the steps above using the
When an alarm rings, press any button to stop/end the alarm.
To turn off an alarm, when on alarm mode, press the
Top View
button to turn the product on or off.
button to enter clock settings, the hours number will
button again and the minutes number will ash on the LED
/ buttons to set the minutes.
button to nish setting the time.
buttons to set the minutes. The Alarm light will light up indicating
/ buttons to select the desired ringtone.
button to save the settings of the 1st alarm.
7 8 9 10 11
/ buttons to set the hour.
/
button.
12
Front View
Side View
button again and the
buttons to set the hour.
buttons.
13
14
15
16