Pantone 2PTSK1456Y0BL Manual

DIGITAL CLOCK WITH BLUETOOTH SPEAKER
Models: 2PTSK1456Y0BL, 2PTSK1456N0BL, 2PTSK1456P0BL, 2PTSK1456E0BL

PRODUCT OVERVIEW

Front View
8 9
1. : press to adjust the brightness of the LED display.
2. : adjust time settings.
3. : adjust time settings.
4. : press and hold to turn the product on.
• When on, press to play/pause music playback.
• Press to answer an incoming call.
• Press again to end the call.
5. : press to play the next song. Press and hold to increase volume level.
6. : press to play the previous song. Press and hold to decrease volume level.
7. (mode) : press to switch to Bluetooth mode. When on alarm mode, press to
set alarms.
8. BT indicator: lights up when connected to a Bluetooth device.
9. TF (Micro SD) : lights up when a Micro SD card is inserted into the TF card port.
10. LED display.
11. (Alarm 1) : lights up when 1st alarm is set.
12. (Alarm 2) : lights up when 2nd alarm is set.
13. AM : lights up when on AM.
14. PM : lights up when on PM.
15. AUX port: use a 3.5mm audio cable (not included) to connect to an external
audio device.
16. TF Card/Micro SD card slot: insert your Micro SD card to play the songs stored
in your Micro SD card.
17. Microphone
18. Micro USB port: use the supplied Micro USB cable to charge the product.

OPERATION

Power on and charging

Before rst time use, charge the product using the supplied Micro USB cable.
Plug the cable into the Micro USB port on the product and the other end to a
power source. Charge for 2 hours.
Press and hold the

Setting the time

Press the button, you will hear "clock mode" prompt.
Press and hold the
use the / buttons to set the hour.
Press the button and the minutes numbers will ash on the LED display, use the
/ buttons to set the minutes.
Press and hold the

Alarm settings

Press and hold the
Press and hold the
buttons to set the hour.
Press the button and the minutes number starts blinking, use the
to set the minutes.
Press and hold
To set the 2nd alarm, press the
LED display.
Press and hold the
buttons to set the hour.
Press the button and the minutes number starts blinking, use the
to set the minutes.
Press and hold
To turn off an alarm, press the
To turn off both alarms, press the
LED display.
button to turn the product on.
button until the hour number will ash on the LED display,
button to nish setting the time.
button until
button and the hours number starts blinking, use the
button to nish setting the 1st alarm.
button 4 times until the 2nd
button until the hours number starts blinking, use the
button to nish setting the 2nd alarm.
button until one
10
11
12
13
14
1
lights up on the LED display.
lights off on the LED display
button repeatedly until both
2 3 4 5 6
Top View
Side View
/
lights up on the
/
light off on the
7
15
16
17
18
/
buttons
/
buttons