Table of Contents
Advertisement
1.
Incorrect use of this charging cable may
result in fire, property damage and serious
injury or death by electrocution!
2.
Always use a correctly earthed power
socket, protected by a 30 mA residual
current device.
3.
Always use an electrical socket protected
by a circuit-breaker appropriate for the
electrical circuit's current rating.
4.
The weight of the control unit must not be
borne by the electrical socket, plug and
cables.
5.
Never use this charging cable if it is
defective or in any way damaged.
POWER
CHARGE
(green)
(green)
6.
Never attempt to repair or open this
charging cable. It contains no repairable
parts - replace the charging cable if it is
damaged.
7.
Never immerse this charging cable in water.
8.
Never use this charging cable with an
extension cable, a multi-plug socket, a
conversion adaptor or on a damaged
electrical socket.
9.
Do not unplug the plug from the wall as a
means of stopping charging.
10. Immediately stop charging, by locking and
then unlocking the vehicle using the remote
control key, if the charging cable or wall
socket feel burning hot to the touch.
11. This charging cable includes components
liable to cause electrical arcing or sparks.
Do not expose to flammable vapours.
12. Only use this charging cable with PEUGEOT
vehicles.
FAULT
Symbol
(red)
Practical information
13. Never plug the cable into the wall socket (or
unplug it) with wet hands.
14. Do not force the connector if it is locked into
the vehicle.
Type 2 control unit label - State of
indicator lamps
indicator lamp
Off
On
Flashing
Description
Not connected to the power supply or power is not
available from the infrastructure.
The control unit is currently performing a self-test.
7
State of the
173
Advertisement
Table of Contents
