Lane Positioning Assist - PEUGEOT 3008 Handbook

can lead to an incorrect evaluation of
distances and result in inappropriate
acceleration or braking of the vehicle.
Pay particular attention:
– When motorcycles are present and
when there are vehicles staggered across the
traffic lane.
– When entering a tunnel or crossing a
bridge.
If any of the following malfunctions
occurs, do not use the system:
– Following an impact on the windscreen
close to the camera or on the front bumper
(versions with radar).
– Brake lamps not working.
If the vehicle has undergone any of the
following modifications, do not use the
system:
– Carrying long objects on roof bars.
– Towing.
– Use of the "space-saver" type spare wheel
(depending on version).
– Front end of the vehicle modified (for
example by adding long-range headlamps or
painting the front bumper).
– Obstructed radar.
Malfunction
In the event of a malfunction,
dashes are displayed instead of
the speed setting.
This warning lamp comes on,
accompanied by a message and an
audible signal, to confirm the malfunction.
Have it checked by a PEUGEOT dealer or a
qualified workshop.

Lane positioning assist

For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
The system identifies the edges of the traffic lane
and steers the vehicle to keep it inside this lane
and maintain the lateral position chosen by the
driver.
To do this, the system uses a camera placed on
the upper part of the windscreen.
This system is particularly suited to driving on
motorways and main roads.
Operating conditions
– Adaptive cruise control active.
– Traffic lane marked out by lines on both sides.
– ESC system operational.
– ASR/CDS systems activated.
– No trailer detected.
– No 'space-saver' spare wheel in use.
– Vehicle not subject to strong lateral g-forces.
– Direction indicators not activated.
Activation/Deactivation
► With the Adaptive cruise control with Stop &
Go function activated, press this button.
The action is confirmed by:
– The indicator lamp in the button lighting up
green.
– The following symbol being displayed on the
instrument panel.
The colour of the symbol on the instrument panel
depends on the operating status of the system:
(grey colour)
One or more operating conditions is not
met; the system is paused.
(green colour)
Driving
6
143