Powerhead using the channels on both sides as a guide, pressing down until you hear it IMAGE 4 click in place (Image 4). Y our StrikeMaster Lithium 40v is ready for use. BATTERY CARE AND MAINTENANCE PRODUCT SPECIFICATIONS 1. Store Battery in a warm, dry location (35°F/ 2°C – 100°F/ 38°C).
Page 3
GENERAL POWER TOOL SAFETY WARNINGS 4) POWER TOOL USE AND CARE A) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. W A R N I N G B) Do not use the power tool if the switch does not turn it on and off.
SYMBOLS KNOW YOUR BATTERY The following signal words and meanings are intended to explain the levels of risk associated with this product. The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting.
A fully discharged Battery will require approximately 180 minutes to fully charge from a discharged state. When servicing use only identical StrikeMaster replacement parts. Use of any other parts may create a hazard or cause product damage.
StrikeMaster, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty...