Chevrolet TrailBlazer 2003 Manual page 129

Cruise Control
R
(On): Move the switch to this position to turn the
cruise control system on.
S
(Resume/Accelerate): Move the switch to this
position to resume a set speed or to accelerate.
T
(Set): Press this button, located at the end of the
lever, to set a speed.
9
(Off): This position turns the cruise control system
off and cancels memory of a set speed.
With cruise control, you can maintain a speed of about
25 mph (40 km/h) or more without keeping your foot
on the accelerator. This can really help on long
trips. Cruise control does not work at speeds below
about 25 mph (40 km/h).
If you apply your brakes, the cruise control will shut off.
The cruise controls are
located on the end of the
turn signal/multifunction
lever.
{
CAUTION:
•
Cruise control can be dangerous where
you can't drive safely at a steady speed.
So, don't use your cruise control on
winding roads or in heavy traffic.
•
Cruise control can be dangerous on
slippery roads. On such roads, fast
changes in tire traction can cause
needless wheel spinning, and you could
lose control. Don't use cruise control on
slippery roads.
{
CAUTION:
If you leave your cruise control on when you're
not using cruise, you might hit a button and go
into cruise when you don't want to. You could
be startled and even lose control. Keep the
cruise control switch off until you want to use
cruise control.
3-11