Page 1
A727 Mutiscanning Color Monitor User's Guide www.hyundaiQ.com...
Page 2
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DECLARATION OF CONFORMITY HYUNDAI ImageQuest CO., LTD. Ami-ri Bubal-Eub Ichon-Si Kyungki-Do 467-860 KOREA declare under our sole responsibility that the product: Kind of equipment COLOR MONITOR T ype-Designation A727 to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
Page 4
A727 Multiscanning Color Monitor Contents 1. Introduction .......1/19 2. Safety Information ....1/19 3. Installing the monitor ....3/19 3-1. Packing List ........3/19 3-2. Fastening the swivel and tilt base ...4/19 3-3. Selecting a suitable location..4/19 3-4. Connecting the monitor....5/19 3-5. Installing the driver......7/19 3-5-1.
A727 Multiscanning Color Monitor 1. Introduction This manual contains instructions for installing and operating NEC CI A727. NEC CI A727 is a highly ergonomic color display unit; • 17” diagonal (15.7” viewable) 0.27mm dot pitch CDT • Supporting high screen refresh rates and full scan flicker-free picture quality •...
A727 Multiscanning Color Monitor Cleaning and Maintenance • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. • Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air.
Page 7
A727 Multiscanning Color Monitor 3. Installing the The following items should be found in the packaging. monitor 3-1. Packing List Tilt and Swivel Monitor Attached Signal Cable Compact Disc Power cord Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged.
A727 Multiscanning Color Monitor 3-2. Fastening the swivel and tilt base • Place the base against the bottom of the monitor so that the base fasteners are aligned with appropriate slots. • Push the base towards the front of the monitor until the latch locks into position.
A727 Multiscanning Color Monitor 3-4. Connecting the Before you start cabling your monitor, check that monitor the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets. 5/19...
Page 10
A727 Multiscanning Color Monitor Insert the 15-pin signal cable connector to the VGA connection on your computer and screw it down. Plug the display unit’s power cable first to the back of the display unit. Then plug the power cable to a 100V - 240V earthed electrical outlet or to the system unit, if it has an outlet for the display power cable.
A727 Multiscanning Color Monitor 3-5. Installing the driver This monitor complies with Microsoft Windows Plug and Play standard. 3-5-1. Windows The monitor will be detected automatically when starting Windows 95/98 or 2000. 95/98/2000 Switch on the monitor. Start Windows. New hardware will be found (Plug and Play monitor) and the 'Add New Hardware Wizard' will start up.
A727 Multiscanning Color Monitor 3-5-2. Other operating systems No drivers are required for other operating systems, such as DOS, Windows 3.1x or Windows NT. 3-6. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98. Go to the configuration window (Start-Settings-Configuration window).
A727 Multiscanning Color Monitor 4-1. Using the On Screen Push the MENU button to call the OSD to the screen. The resolution and Display frequency are displayed at the top of the menu box for your information. Push the button to choose the item you want to adjust. The selected item is highlighted.
Page 15
A727 Multiscanning Color Monitor 4-3. OSD Adjustments The OSD adjustments available to you are listed below. H. SIZE You can play the movie Adjusts the horizontal size of the entire screen image. file to see how to adjust the picture image by H.
A727 Multiscanning Color Monitor PIN BALANCE If the sides of the picture are bowed to the right or to the left, you can correct the pincushion balance by using this adjustment. V. MOIRE Clears vertical moire if a series of concentric circles or arcs appear on your screen.
Page 17
A727 Multiscanning Color Monitor OSD H. POSITION Adjusts the OSD menu’s horizontal position on the screen. OSD V. POSITION Adjusts the OSD menu’s vertical position on the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish.
Page 18
A727 Multiscanning Color Monitor DEGAUSS External magnetic fields may cause distortion or discoloration in the picture. Demagnetizing takes place automatically when the display unit is switched on, and the unit normally maintains faultless color purity during operation. If you have tilted, swiveled or moved the display unit, you can perform demagnetization.
A727 Multiscanning Color Monitor 5. Display power If the power management function of your computer is enabled, your monitor management turns on and off automatically. You can control power management features from your computer. Reducing power Your computer may have power management features which enable the computer consumption or monitor to enter a power saving mode when the system is idle.
A727 Multiscanning Color Monitor 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by reading followings. Problem Possible solution Blank screen If the power LED is not lit, push the power switch to turn the monitor on.
Page 21
A727 Multiscanning Color Monitor Problem Possible solution The display does The video signal from the computer does not comply with VESA not enter power DPMS standard. Either the computer or the graphics adapter is not management using the VESA DPMS power management function. mode Screen flickers The screen may seem to flicker when the refresh rate is less than...
A727 Multiscanning Color Monitor Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible. Unplug the display unit from the power outlet and contact a service agent when: •...
A727 Multiscanning Color Monitor 7. Specifications 17"(viewable size : 15.7") Dot pitch 0.27 mm Picture tube Anti-Static, anti-glare, TCO treatment coated. Display area factory preset area : 306X230 mm Number of color Infinite Input signals R.G.B Analog, 15 pin D-sub Horizontal : 30 to 70kHz Frequency rate Vertical : 50 to 150Hz...