CDA 4Q4 HVG 65 User Operating Instructions Manual page 21

HVG 65 - 4Q
: 54 mm from top of countertop
(1)
: at least 60 mm between the back side of the cut-out and the back of the countertop.
(2)
INSTALLING THE
SEPARATOR BELOW THE
BASE OF THE COOKTOP
It is recommended that a 30 mm clear-
ance be left between to base of the
cooktop and the separator.
The separator shall be heat resistant,
made of low thermal conductivity
material and shall be removable with
the use of a tool for installation and ser-
vice.
Figure 19
4
HVG 95
HVG 75
Figure 20
Clearance
Separator
Space for
connections
21