Correct Positioning Of The Burners - CDA 4Q4 HVG 65 User Operating Instructions Manual

CORRECT POSITIONING OF THE AUXILIARY, SEMIRAPID AND
RAPID BURNERS
✓
It is very important to check that the
burner flame spreader "F" and the
cap "C" have been correctly posi-
tioned (see figs. 11 and 12). They
shall be level and must not rotate.
Failure to do so can cause serious
problems.
✓
The pan supports shall be correctly
positioned as indicated in fig. 13.
The pan supports shall be level and
must not rotate.
Models with triple-ring burner: be
sure not to fit the triple-ring burner
pan support on the auxiliary, semi-
rapid or rapid burners. The triple-ring
burner pan support IS ONLY to be
used on the triple-ring burner.
Figure 11
Ignitor "S"
16
C
F
Flame failure
probe "T"
Figure 12
Figure 13