Specifications - Panasonic AH1 Quick Start Manual

■ PC board left angle terminal
Actuators
Pin plunger
Hinge lever
Simulated roller lever
Notes: 1. The appearance of right and left angle types are as below.
Right angle

SPECIFICATIONS

■ Contact rating
AgNi alloy contact type
AgNi alloy + Au-clad contact type
■ Combination with Operating Force (OF) and applicable current range (reference)
3A
1A
100mA
1mA
0
DC 5V
AC 5V
Note) OF: Value of pin plunger
Note: The diagram above is intended as a reference. Please use the product within the rated voltage and current.
■ Characteristics
Mechanical life (OT) Specified value
Expected
life
Electrica (OT) Max.
Insulation resistance
Between non-continuous terminals
Dielectric Between each terminal and other exposed
strength metal parts
Between each terminal and ground
Contact resistance (Initial)
Vibration resistance (Pin pluger type)
Shock resistance (Pin plunger type)
Allowable operating speed (No load)
Max. operating cycle rate (No load)
Ambient temperature
Unit weight
Protection grade
Notes: 1. Test conditions and judgement are in accordance with NECA C 4505.
2. OF: Value of pin plunger type
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from
Operating Force (OF)
Max.
0.74 N
1.47 N
0.25 N
0.49 N
0.26 N
0.54 N
Left angle
(OF) 0.74N type
(OF) 1.47N type
AgNi alloy
contact
OF0.74N OF1.47N
Au-clad contact
15V 30V
15V 125V
Item
AgNi alloy contact type
AH18809
AH18609
AH18829
AH18629
AH18849
AH18649
Standard rating
1A 125V AC, 1A 30V DC
3A 125V AC, 2A 30V DC
0.1A 125V AC, 0.1A 30V DC
AgNi alloy contact type
(OF) 0.74 N type: Min. 10
(OF) 1.47 N type: Min. 5 × 10
Min. 3 × 10 4
(at 20 cpm) (at rated load)
Min. 100 MΩ (at 500V DC)
600 Vrms for 1 min.
1,500 Vrms for 1 min.
1,500 Vrms for 1 min.
Max. 30 mΩ
(by voltage drop, 1A 6 to 8V DC)
10 to 55 Hz at single amplitude of 0.75mm (Contact opening: Max. 1 msec.)
Min. 294 m/s (Contact opening: Max. 1 msec.)
2
1 to 500 mm/sec.
–25 to +85°C (no freezing and condensing)
3
© Panasonic Corporation 2019
AH1 (FJ) Miniature Switches
AgNi alloy + Au-clad contact type
AH1880619
AH1860619
AH1882619
AH1862619
AH1884619
AH1864619
Minimum rating
—
—
5mA 6V DC, 2mA 12V DC, 1mA 24V DC
AgNi alloy + Au-clad contact type
6 (at 60 cpm)
5 (at 60 cpm)
Min. 10
(at 20 cpm) (at rated load)
Max. 100 mΩ
(by voltage drop, 0.1A 6 to 8V DC)
120 cpm
Approx. 0.5g
IP40
AECTB15E 201903
5