Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 15-5555 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Place the palm-rest assembly at the edge of the table with the coin-cell
battery facing away from the edge.
2 Align the screw holes on the display hinges with the screw holes on the
palm-rest assembly.
3 Replace the screws that secure the display hinges to the palm-rest
assembly.
4 Close the display and turn the computer over.
5 Route the display cable through the routing guides on the palm-rest
assembly.
6 Slide the display cable to the connector and press down on the latch to
connect the display cable to the system board.
7 Route the antenna cable through the routing guides on the palm-rest
assembly.

Post-requisites

1 Follow the procedure from step 3 to step 8 in
base".
2 Replace the keyboard.
3 Replace the
4 Replace the
5 Replace the
6 Replace the
7 Replace the battery.
74
wireless card.
hard drive.
base cover.
optical drive.
computer. After working inside your
After working inside your
"Replacing the computer