Samsung 8 SCL540 Owner's Instruction Book page 43

Selecting an effect
1. Set the power switch to CAMERAmode and LOCK/STANDBY switch to STANDBY mode. (see page 22)
2. Press the MENU ON/OFF button, the MENU list will appear.
(SCL540 : CVF....OFF)
3. Turn the MENU dial to DSE SELECT.
4. Press ENTER.
- The DSE setting is now possible.
5. Turn the MENU dial to the desired DSE effect.
6. Press ENTER.
The selected DSE effect will now be visible on the LCD.
After selecting MAKE-UP, STROBE or LSS, press ENTER,
- in MAKE-UP mode, the MENU list for selecting RED/YEL-
LOW/GREEN/BLUE will appear.
- in STROBE mode, the MENU list for selecting 30 fields (1)/15 fields (2)/ 8 fields (3) will appear.
- in LSS mode, the MENU list for selecting 1/30(1), 1/15(2), 1/8(3) will appear. Select a mode with
the MENU dial and press ENTER.
To change the content of the selection, place the cursor on the corresponding position by turning
the MENU dial and press ENTER again.
7. To end the setting, press the MENU ON/OFF button.
Recording DSE in CAMERA mode
1. Set the power switch to CAMERA mode and LOCK/STANDBY
switch to STANDBY mode. (see page 22)
2. Press the START/STOP button.
Recording starts.
3. Press the DSE button during recording to record an effect you have
selected.
The effect you have selected will appear.
4. To return to normal, press the DSE button again.
ENGLISH
EVF......................OFF
DIS........................OFF
D.ZOOM ..............OFF
DEMO..................OFF
PROGRAM AE
DSE SELECT
MAKE-UP
EMBOSS
CINEMA
NEG.
MIRROR
MOSAIC
MAKE-UP
EMBOSS
CINEMA
NEG.
MIRROR
MOSAIC
43