Advertisement
Quick Links
Advertisement
Related Manuals for ARTRED AR50
Summary of Contents for ARTRED AR50
-
Page 2: Table Of Contents
Contents 1.0 Operational Safety Guidance.............2 2.0 Functions and matters needing attention......6 3.0 Notes for First Use................ 7 3.1Battery Charging and Maintenance.........8 4.0 Daily operation and maintenance........... 10 - 1 -... -
Page 3: Operational Safety Guidance
Operational Safety Guidance Read this user guide carefully before operating the machine. General safety guidelines for mechanical preparation, operation, and maintenance are detailed in this book and must be observed in accordance with accident prevention regulations. If an accident is caused by not following these rules, the manufacturer will not be responsible! This guide is also one of the important accessories of machinery. - Page 4 This machine is powered by DC power supply. It is absolutely impossible to make a wrong polarity connection of batteries. Once connected with the machine, it will cause damage to all electrical parts of the machine. Batteries of different specifications and brands have matching chargers. It is possible to damage batteries or even cause battery burst by using unmatched chargers casually.
- Page 5 Avoid contact with the rotating parts of the machine with hands, feet and loose clothes. Careful and slow movement should be taken when the machine is operating near the edge. The space between the anti-collision wheel and the wall should be paid attention to, so as to avoid the machine moving from small obstacles, such as ground power outlet, threshold, ground wire foot and so Use of water or detergent will make wet surface, these places are easy to cause operators or others to slip, when operating, please place warning...
-
Page 6: Functions And Matters Needing Attention
2.0 Functions and matters needing attention Functions Anrunto-B50 floor scrubber is suitable for cleaning flat ground. It uses two 15-inch brush discs or needle holders to clean the ground. The dirty water washed is sucked into the sewage tank by the suction pick behind the machine. It can complete the cleaning work only by walking the machine on the ground once. -
Page 7: Notes For First Use
wet cloth should be used to wipe all parts of the equipment. 13. The maintenance and repair of this equipment must be carried out by professional personnel. 3.0 Notes for First Use For the first use of new machine, please follow the below procedures: Carefully open the package to prevent damage to the machine in the process of opening. -
Page 8: Battery Charging And Maintenance
required. Move the machine to the parking place. 3.1Battery Charging and Maintenance Safety regulations for handling acid batteries Park the scrubber securely before carrying out any work on the batteries. Maintenance personnel : Batteries may only be charged, serviced or replaced by trained personnel .The present operator manual and the manufacturer ’s instructions concerning batteries and charging stations must be observed when carrying out the work. -
Page 9: Daily Operation And Maintenance
Daily operation and maintenance Preparation work: 1) Choose appropriate detergent and detergent concentration according to the contaminated state of the ground; Generally speaking, only two cups of cleaning liquid from a disposable water cup are needed. The disposable water cup is shown in the right picture. In order to protect the environment, please try to reduce the amount of detergent! Please use neutral low foam detergent! When using detergent, defoamers should be used at the same time to eliminate sewage tank foam and... - Page 10 2）In the past, cleaner was added to the nozzle, and then clean water was added to the water tank. If you take water from tap with water pipe, you can insert the water pipe directly into the water filling hole on the side of the machine, but you should pay attention to the water level, so as not to overflow the cleaning liquid! Starting working: In areas to be cleaned, the ground should be cleaned first to remove larger...
- Page 11 is suddenly abnormal during use, and the squeegee does not absorb water or the sound of the squeegee is normal, the squeegee cannot absorb water, you should stop the operation immediately for inspection; ①The water level has risen to the highest position (floating up cut off the wind path),you will discharge sewage;...
- Page 12 Maintain Squeegee： Squeegee is an important part of floor washer. In the process of absorbing water, because of the friction between adhesive tape and ground, it will wear out. When the effect of absorbing water is not good, the following checks should be made.
Need help?
Do you have a question about the AR50 and is the answer not in the manual?
Questions and answers