Antaira Technologies
DTD-360-0953-T
360W Industrial DIN-Rail Power Booster, 9-36VDC power input,
53VDC power output, -40°C~75°C
Quick Installation Guide
Version 1.0
(April 2023)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
Package Check List
The package contains the following items:
1 – Quick installation guide
1 – DTD-360-0953-T
2 – Wall mounting bracket set with screws
Front Panel Layout
Adjustable Knob for Output
Voltage Control from 48 to 55VDC
LED for Power Output Status
LED for Power Input Status
Top Panel View
Grounding Screw
Product Overview
System Interface/Performance
Featuring the booster technology from 9-36VDC power
input to 53VDC
Output voltage adjustable (48V-55V) via built-in SVR
Protection: short circuit (Output) / overload (Input)
Protection: Input / Output reverse polarity protection
Protection: Input Under Voltage
LED power indicator (Input / Output)
19020000000208
Operating Temperature
Case/Installation
Power Input
Grounding Screw
4-Pin Removal Terminal Block for DC Power Output
Note:
3-Pin Terminal Block for DC Power Input
1.
2.
Power Output
4-Pin Removal Terminal Block for DC Power Output
Note:
1.
LED Indicators
Extended operating temperature model: -40°C to 75°C
IP30 protection
DIN-Rail and Wall mount design
Installation in a pollution degree 2 industrial
environment
Fan-less Design, cooling by free air convection
Power inputs contact interface are on the front panel
Support 9-36(up to 55)VDC power inputs through 3-pin
terminal block interface
Only use copper conductors, 125°C, tighten to 7 lbs.
The wire gauge for the terminal block should range between
18~20 AWG.
Support DC power outputs through removable 4-pin
terminal block interface
DC output voltage is adjustable from 48 to 55 VDC by
the adjusting knob
Please adjust the knob by fine-tuning.
LED
Color
Description
On
DC Input works normally
Input OK
Green
Off
DC input is failed
On
DC output works normally
Output OK
Green
Off
DC output is failed
Need help?
Do you have a question about the DTD-360-0953-T and is the answer not in the manual?
Questions and answers