Table of Contents
Advertisement
en
Interior light *
The interior light comes on when the door
is opened irrespective of whether the
ON/OFF switch
1
When the door is closed or ajar, the light
is off.
Open the door.
Switch on ON/OFF switch
Hold down programme button A and
press START button
is indicated on the digital display.
Release both buttons.
The LED for button A flashes and
the digital display displays the factory
setting
.
Press programme button A until
the factory set value
on the digital display
To change the setting,
Press the button C to switch
the interior light off
Press START button
The set value is saved.
Close the door.
* depending on model
18
20
is switched on or off.
.
1
until
10
is indicated
.
3
or on
.
.
10
Maintenance and care
A regular inspection and maintenance of
your machine will help to prevent faults.
This saves time and prevents problems.
Overall condition
of the machine
Check spray arm for grease and
limescale deposits.
If you find such deposits:
Fill detergent dispenser with detergent.
Start the appliance without utensils in
the programme with the highest rinsing
temperature.
Clean the appliance with detergents/
appliance cleaners which are particularly
suitable for use with dishwashers.
Regularly clean door seal with a damp
cloth.
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not liable
for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water and
a little washing up liquid are adequate.
Do not use sponges with a rough surface
or abrasive detergents, as these could
scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths or
wash them out thoroughly several times
before using for the first time.
Warning
Never use other chlorinated household
detergents! Health hazard!
Salt and rinse-aid
Check the refill indicators
If required, refill salt and/or rinse-aid.
and
.
5
6
Advertisement
Table of Contents
