Advertisement
Safety Inspection Check List
The following items should be inspected before use:
☐ Check for Water leakage from tank, valves, piping, or hoses.
☐ Check ratcheting valve rope for any damage.
☐ Check cradle straps to ensure they are tight and bolted in properly.
☐ Make sure vent cap is secured in place properly.
☐ Inspect hoses for any tears or damage to hoses or connectors.
☐ Inspect spray boom for any damage to boom or nozzles.
☐ Check engine for fuel or oil leakage – if found refer to motor manufacturer manual.
☐ Check engine for fuel level before operating the motor. Refer to motor manufacturer manual for running instructions.
☐ Check engine for oil level before operating the motor. Refer to motor manufacturer manual for running instructions.
☐ Inspect hand jack for any damage and ability to raise or lower the Water Trailer.
☐ Check tow receiver, safety chains, and hooks for any damage.
☐ Check wheels, and rims for damage. Check lugs or studs to ensure they are tight.
☐ Check tires for proper air pressure. Refer to PSI rating on the tire for proper air pressure.
☐ DOT models-- Check to make sure the standard electrical connector is properly connected, and free of damage.
☐ DOT models – Check to make sure breakaway brake line is secured and free of damage.
☐ DOT models – Ensure Running/Brake lights are working before driving on any public road.
☐ DOT models – Ensure that reflectors are visible and not damaged.
☐ DOT models – Make sure fenders are not hitting the tires and are free of damage.
☐ DOT models – Make sure all hoses are properly secured before driving on any public road.
Email: support@abiattachments.com
CAUTION: Correct any discovered defects before continuing use!
7
Call Toll Free: 877-788-7253
Advertisement
