Table of Contents
Advertisement
5
Using the disassembly stick, lift up on the separator groove to the lower of the main
board, and remove the main board module.
Be careful not to damage the PBA.
After you finish disassembling, refer to
reassemble.
Upper Speaker Remove
1
Remove 2 screws of the upper speaker.
Be careful not to damage the near components.
Check the number of screws that have been removed, and store them carefully to
make sure that no unassembled screws are left inside the device during assembly.
Disassembly and Assembly
Main Board Assembly
for how to
66
Advertisement
Table of Contents
