Advertisement
Advertisement
Table of Contents
Related Manuals for RSQ RW-4002U
Summary of Contents for RSQ RW-4002U
- Page 1 RW-4002U UHF WIRELESS MICROPHONE SYSTEM USER’S MANUAL...
- Page 2 The receiver unit, features with quartz controlled fixed frequency VHF high band, is compatible with our wireless microphone series for dual or multi channels use. This series applies tone code squelch design to avoid interference from outside signal and noise.
- Page 3 2. Channel A Volume Control: control sound volume of CH A. 3. Channel B Volume Control: control sound volume of CH B. 4. Channel A Microphone Signal LED Indicator: when microphone is turned on, RF LED Indicator will light. It means receiving signal.
- Page 4 Modulation: +/-15KHz Frequency Stability: +/-0.005%quartz controlled Power Output: 30mW a) Power Adapter 1 PC b) Output Connector 1 PC c) Microphone 2 PCS d) User’s Guide 1 PC e) 9V Batteries 2 PCS Receiver Frequency Range: VHF 170~250MHz Operating Range: 50~100m(in open & line...
- Page 5 During operation the nearer the distance, the better the performance. 11. Remember to turn off microphone then receiver after use to save power. 12. If microphone is not going to be used for a long period of time, take out battery to prevent damage of PCB from leaking battery.
- Page 6 One receiver cannot receive signal from two same frequency microphones simultaneously. Other microphone with different frequency or brand cannot be used for this receiver. To prevent hurt from heavy article dropping, do not put heavy article on the top of this equipment.
- Page 7 17202 Marquardt Ave., CA 90703 www.mediasynccorp.com Tel: 562)404-9950 Fax: 562)404-9951...
Need help?
Do you have a question about the RW-4002U and is the answer not in the manual?
Questions and answers