Get Started; Charge The Battery; Pair The Headphones With Your Mobile Phone - Philips TAE4205 User Manual

3 Get started

Charge the battery

Note
 Before you use your headphone for the rst
time, place the headphones in the charging
case and charge the battery for 2 hours for
optimum battery capacity and lifetime.
 Use only the original USB charging cable to
avoid any damage.
 Finish your call before charging the
headphone, as connecting the headphone for
charging will power the headphone o .
Connect the supplied USB charging
cable to the charging slot on the
headphones and the charger/USB port
of a computer.
LED turns white during charging and
turns o when the headphones is fully
charged.
Tip
 Normally, a full charge takes 2 hours.
Pair the headphones
with your mobile phone
Before you use the headphones with
your mobile phone for the rst time, pair
it with a mobile phone. A successful
pairing establishes a unique encrypted
link between the headphones and
mobile phone. The headphones store
the last 4 devices in the memory. If you
try to pair more than 4 devices, the
earliest paired device is replaced by the
new one.
Make sure that the headphones are
fully charged and turned o .
Press and hold the on/o
button(>6s), blue and whites LED
ashes alternately which means the
headphones enter Bluetooth pairing
mode. The headphones remain in
pairing mode for 5 minutes.
Make sure that the mobile phone is
turned on and its Bluetooth feature
is activated.
Pair the headphones with the
mobile phone. For detailed infor-
mation, refer to the user manual of
your mobile phone.
Tip
 Enter the headset password "0000" (4 zeros) if
prompted. For those mobile phones featuring
Bluetooth 3.0 or higher, no need to enter a
password
Download Philips
Headphones app
Download and install the Philips Head-
phones app from Google Play store or
App Store on your mobile phone.
When your headset is connected to the
mobile phone, you can launch the
Philips Headphones app and use
features listed as below:
Adjust volume
Adjust equalizer
Check the status of remaining battery
Headset software update