Table of Contents
Advertisement
2.2 Programming
HTTP Port Number Settings
Parameter & Description
#
HTTP Port No.
Specifies the port number for HTTP communications
by the card.
Generally, there is no need to change the default value.
Others
Parameter & Description
Host Name
This parameter is provided for engineer use only.
#
LAN Disconnect Threshold Time (s)
Specifies the time (in seconds) until disconnection
from the LAN is recognised.
For example, even if a LAN cable is disconnected
during a call, reconnecting the cable within this time
period maintains the call.
Detailed Explanations
DHCP Server
When using the DHCP feature, the IP address settings of the card (IP address, subnet mask,
and default gateway) will be assigned by a DHCP server.
However, keep in mind that the maintenance of the card is performed through a web browser
from a PC; hence you must know the IP address of the card. Therefore, it is necessary to set
up the DHCP server to assign a static IP address to the card from a pool of IP addresses that
is defined in advance. For more information about DHCP server settings, consult your network
administrator.
In addition, it is also necessary to specify the values for the parameters under "IP Address
Settings" as they will be assigned by the DHCP server.
12
Programming Guide
Default
Value Range
80
1 to 65535
Default
Value Range
VoIP + lower 3
Max. 255 characters
bytes of the MAC
address
5
1 to 10
Advertisement
Table of Contents
