Stairville DMX Joker V2 512 TOUCH Quick Start Manual

DMX Joker V2 512 TOUCH

Safety instructions

Intended use

This device is intended to control lighting devices and effects via computer using
appropriate software. Any other use or use under other operating conditions is con-
sidered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke!

Features

• Interface for Stairville DMX Joker, DMX Joker Pro, and DMX Joker V2
• 512 channels
• Slim design
• Big colour wheel
• Visual intuitive, touch-sensitive multifunction surface
• Ideal for all fixed indoor installations
• Up to 200 scenes memory using Global Scene option in page mode

Operating elements and connections

-
,
+
*
)
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.

Where to use the product

Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
• near magnetic fields

General handling

• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not
use liquid cleaners such as benzene, thinners or flammable cleaning agents.
• Up to 40 scenes by grouping zones
• Up to five groups or zones selectable
• Speed, scene, dimmer and zone setting directly on the device
• Integrated clock and calendar
• Cross fade time between scenes
• Automatic scene recovery after power cut-off
• 16-bit fine channel management
1 Selecting a zone / scene, hold pressed for 2 seconds to combine zones
2 Selecting a scene (1 - 8); 8 scenes per zone or page
ö
3 Colour wheel to select RGB, amber and white for the selected zone
4 Setting the colour temperature warm white / cold white for the selected zone
#
5 Setting the dimmer intensity
6 Enabling the dimmer mode for 5 seconds, adapting the brightness using the
wheel
$
7 Enabling the colour mode, selecting the colour using the wheel, hold pressed
%
for 3 seconds to enable the cold white / warm white mode.
&
8 Enabling the scene mode, starting or stopping the selected scene using the
colour wheel
9 Enabling the speed mode for 5 seconds, adapting the speed of the current
'
scene using the colour wheel
10 Setting the scene speed
(
11 Canceling the settings, hold pressed for 3 seconds for turning off
12 Touch-sensitive colour wheel to activate a zone, to select a scene, to set the
colour temperature, the intensity and the speed
DocID: 547122_04.10.2022
EN