Band Search - RCA RP-6198 User Manual

U
SING THE
B S
AND EARCH
You can search for and store active
frequencies by using BAND SEARCH.
1. Press BAND and the display shows
the last selected band number and
the frequency search range.
2. To select a different band, either
enter the desired band number or
press BAND repeatedly until the
desired number is displayed.
Note: When entering a band
number, make sure you enter it
within 2 seconds after BAND is
pressed.
3. After 2 seconds (approx.), SRCH
appears on display and searches in
that band (from the lowest to
highest frequency) for an active
frequency.
4. While the scanner is searching, you
can select a different band by
repeating step 2.
5. When an active frequency is found,
the scanner stops search and
displays the frequency number. You
can continue the search by pressing
and holding
second.
S
CANNER
or for about a
The following list are the
preprogrammed Band Search ranges:
BAND Frequency Search Range
(in MHz)
1 29 - 54
2 108 - 136.975
3 137 - 148
4 148 - 174
5 380 - 420
6 420 - 450
7 450 - 512
8 806 - 824
9 849 - 869
0 894 - 960
11