Table of Contents
Advertisement
Quick Links
Part No:EPS-HDM1001IPL
Single Channel MPEG 4 HDMI Digital Modulator
(with loop & IP output)
User Manual
The EPS-HDM1001IPL Single channel HDMI modulator /Encoder is an all-in- one
device integrating MPEG-4 AVC/H.264 encoding and modulating to convert HDMI
signals into DVB -T RF out. The signal source could be from satellite receivers ,
CCTV NVR's, Television, Blue-ray players etc. The output signal is to be received
by a DVB-T MPEG 4 compliant TVs or STBs etc.
The unit has a HDMI loop output, unicast/multicast IP output. Audio delay can be
applied to the modulated signal to sync with audio system.
For more information please call or visit our website: www.electrocraft.com.au
Advertisement
Table of Contents
Related Manuals for Ecraft PRO Series
Summary of Contents for Ecraft PRO Series
- Page 1 Part No:EPS-HDM1001IPL Single Channel MPEG 4 HDMI Digital Modulator (with loop & IP output) User Manual The EPS-HDM1001IPL Single channel HDMI modulator /Encoder is an all-in- one device integrating MPEG-4 AVC/H.264 encoding and modulating to convert HDMI signals into DVB -T RF out. The signal source could be from satellite receivers , CCTV NVR's, Television, Blue-ray players etc.
-
Page 2: Table Of Contents
Thank you for buying this encoder modulator. Please read this manual carefully to install, use and maintain the encoder modulator in the best conditions of performance. Keep this manual for future reference. Directory CHAPTER 1 Product Introductions ............... 1 General Description ..................... 1 System Connection Chart .................. -
Page 3: Chapter 1 Product Introductions
CHAPTER 1 Product Introductions General Description Electrocraft EPS-HDM1001IPL encoder & modulator is designed based on consumer electronics which allow HDMI signal input in TV distributions with applications in home entertainment, surveillance control, hotel Digital Signage, etc. It is an all-in-one device integrating encoding and modulating to convert audio/video signals into DVB-C/DVB-T/ISDB-T/ATSC RF out. -
Page 4: System Connection Chart
Indicators LCD windows Control Buttons System Connection Chart RF for mix Monitor Attenuation: 10dB TV+AV to the RF out distribution network HDMI Input Audio out STB/IRD Audio Radio Broadcast input Camera IP out UDP, RTP/RTSP Microphone... -
Page 5: Technical Specifications
Technical Specifications Encoding Section HDMI Encoding HEVC/ H.265, MPEG 4 AVC/H.264 Interface HDMI*1. HDMI loop out*1 Video 1920*1080_60P, 1920*1080_50P, 1920*1080_59.94P, Resolution 1280*720_60p, 1280*720_59.94, 1280*720_50P Bit rate 1Mbps~15Mbps Encoding MPEG-1 Layer 2, LC-AAC, HE-AAC, HE-AAC V2; AC3 Pass-through Audio Sample rate 32Khz,44.1Khz,48Khz Bit rate 48~384Kbps... - Page 6 Transmission Mode: ≥35dB RF frequency 100-900MHz, 1KHz step RF output level -63~ -16dBm, 1dB step ISDB-T Modulator (optional) Standard: ARIB STD-B31 Constellation: QPSK, 16QAM, 64QAM Guard Interval: 1/32, 1/16, 1/8, 1/4 Transmission Mode: 2K, 4K, 8K Code rate: 1/2, 2/3, 3/4, 5/6, 7/8 RF frequency: 100~900MHz, 1KHz step RF output level:...
-
Page 7: Chapter 2 Safety Instruction And Installations
CHAPTER 2 Safety Instruction and Installations Safety Instructions WARNING: Hot plug is not allowed since it may cause system halted. To prevent fire or electrical shock, do not expose the device to rain or moisture. The encoder modulator is powered with a voltage of 12V DC. The power supply voltage must not exceed the recommended voltage, which otherwise may cause irreparable damage to the device and the invalidation of the warranty. -
Page 8: Cascade Installation
screws and plugs to secure the unit to the wall. Left 10 cm of free space around from each unit. Connect the signal input in the respective connectors. The signal source can be from a surveillance monitor, DVD, set-top box, CCTV and etc. Optionally, connect the loop-through RF input coaxial cable. -
Page 9: Chapter 3 Devices Operations And Management
CHAPTER 3 Devices Operations and Management is controlled and managed through the key board and LCD display. EPS-HDM1001IPL LCD Display – It presents the selected menu and the parameter settings. The backlight in the display is on when the power is applied. LED –... - Page 10 Initializing Down Enter Menu Lock Encoder modulator 192.168.0.136 Main Menu Status Status Alarm Status Uptime Video Main Menu Encoder Video Format Encoder Video Video Bitrate Rate Mode PTS Offset Prosile Gop Size CC/Teletext Encoder Audio Audio Audio Bitrate Audio format Audio Delay PTS Offset Audio Gain...
- Page 11 Enable Main Menu IP Stream IP Stream Enable IP Address IP Stream 224.2.2.2 IP Address IP Stream Port Port 3000 Protocol IP Stream UDP RTS/RTSP Protocol IP Stream Pkt Length Pkt Length IP Stream Null Pkt Filter Null Pkt Filter IP Address Network Main Menu...
- Page 12 signal resolution. User can also set Video Bitrate, PTS Offset, Rate Mode, Profile, CC/teletext and Gop size 5) Audio Bit rate: Select audio bit rate among 128, 160.192, 224.256, 320, 384 kbps. Audio Format: Select audio format among Mpeg1 layer2. AC3-Pass. LC-AAC and HE-AAC. Note：...
-
Page 13: Chapter 4 Operations Of Web-Server
Chapter 4 Operations of Web-server In addition to using front buttons to control the encoder modulator and USB device, users can also perform the same operation in an easier way with the web Brower in the PC (Personal Computer). Login The default IP address of this device is 192.168.0.136. -
Page 14: Operation
Operation Summary: When we confirm the login, it displays the WELCOME interface as Figure-2 where users can have an overview of the device’s system information and working status. System information User can click any item here to enter the corresponding interface to check information or set the parameters. - Page 15 Video configuration supports H.265/H.264 User can choose different Audio configuration Figure-3 Parameters → TS Config: From the menu on left side of the webpage, clicking “TS Config”, it displays the interface where users can configure the parameters for the transport stream as prompt. (Figure-4) Figure-4 Parameters →...
- Page 16 Figure-5 Parameters → IP output: From the menu on left side of the webpage, clicking “IP output”, it displays the interface where users can IP configuration. (Figure-6) Figure-6...
- Page 17 System → Network: From the menu on left side of the webpage, clicking “Network”, it displays the interface where users set the network configuration for the device. (Figure-7) Input this address in the browser to connect the device and PC. Figure-7 System →...
- Page 18 System → Firmware: Click “Firmware” from the menu it will display the screen as Figure-9. Here user can update the device by using the update file. Click “Browse” to find the path of the device update file for this device then click “Update” to update the device.
-
Page 19: Appendix
Appendix Australia Air Channels Australia Air Channels Frequency Frequency Start Center Start Center 599.5 606.5 48.5 613.5 59.5 620.5 66.5 627.5 88.5 634.5 97.5 641.5 104.5 648.5 140.5 655.5 177.5 662.5 184.5 669.5 191.5 676.5 198.5 683.5 205.5 690.5 212.5 697.5 219.5 704.5... - Page 20 6MHz Bandwidth 7MHz Bandwidth 8MHz Bandwidth Modulation Guard Interval Guard Interval Guard Interval Constellation 1/16 1/32 1/16 1/32 1/16 1/32 The weak ability of error-correcting and anti-interference in this area 6.03 6.03 5.80 6.45 6.83 7.03 6.64 7.37 7.81 8.04 QPSK 6.22 6.58...
Need help?
Do you have a question about the PRO Series and is the answer not in the manual?
Questions and answers