Download Print this page

Baby Brezza one step Instructions page 4

Steriliser dryer advanced

Advertisement

Modular set-up options
Upper & Lower Baskets
Upper & Lower Baskets
With Accessory Tray
WITHOUT Accessory Tray
For use with short bottles,
For use with tall bottles,
accessories & pump parts.
and accessories.
Upper Basket only
Breast pump parts and any other items safe for
WITHOUT Accessory Tray
steam sterilisation can be placed in the lower or
For use with accessories
upper baskets. Try di erent configurations to find
pacifiers and small items.
what set-up works best for you.
TIP: For best drying performance, Do not overload
the Steriliser Dryer.
Using the tongs
The tongs can be inserted and stored in the
upper basket or the accessory tray.
When the tongs are clicked into place,
they can be used to lift the basket or tray.
Gently squeeze the tongs to remove them.
They can also be used to grasp parts and
bottle nipples in the steriliser.
5
Troubleshooting
Condition
Lower Basket only
Appliance will
With Accessory Tray
not start.
For use with short bottles,
accessories & pump parts.
Timer stops during
sterilise cycle. "No
Water Indicator" on.
Timer Stops During
Sterilise cycle. "No
Water Indicator" on
while there is water
remaining in the
base
Scaling on
water tank
heater plate.
Items not dry
after drying cycle.
If you can not remedy problems by using the troubleshooting chart above, visit babybrezza.co.uk
to contact a customer service representative.
or
Possible Cause
Remedy
Unit is unplugged.
Make sure the plug is securely
inserted into the power outlet.
Unit is not turned on.
Press On/O switch before
choosing function.
Insu cient water is in heater
Add 165ml (5.5oz) water to heater
plate area.
plate area.
Not enough water added to heater
Make sure to fill to max line, at
plate area.
least 165m (5.5oz) water to
heater plate area.
Scaling on water tank heater plate.
Descale the machine following
The machine hasn't been descaled
the weekly descaling instructions
on a weekly basis.
on page # 4
Mineral rich water used
Clean heater plate after each use
persistently.
and use distilled water.
Water is collecting on recessed or
Make sure parts are placed so they
indented areas of items placed
they do not collect water.
in sterilizer.
Drying cycle selected not long
Select longer drying time.
enough to su ciently dry items
in sterilizer.
6

Advertisement

loading