Operating The Clock - RCA RP3715 User Manual

Operating the Clock

Setting Clock Time
Your digital clock operates on a 12-hour
standard mechanism. A green indicator
will be shown below to AM when the unit
is reading AM time.
1. Slide the function selector to CLOCK.
2. Press REV or FWD to set the clock time.
When you press and hold REV or FWD,
the time decrements or increments will
follow by a fast rate. No adjustment
can be made when
Setting the Wake Time
This clock radio has two separate alarms.
You need to set each of them individually.
1. Slide the function selector to WAKE 1
or WAKE 2.
2. Press REV or FWD to set the wake time.
The time decrements or increments will
follow by a fast rate when you press and
hold REV or FWD.
RP3715 EN-US
CLOCK
WAKE 2
REV
CANCEL
WAKE 1 WAKE 2
WAKE 1
SNOOZE
ON/OFF
PRESS
V O I C E
3. Wake time is set. A green indicator is
up on the left-hand side when WAKE 1
is activated while on the right-hand side
when WAKE 2 is activated.
4. To disable WAKE function, press and
hold WAKE 1 or WAKE 2 button until
the indicator disappears.
Cancel Wake Function
1. Press CANCEL
2. Press WAKE1 or WAKE2 button to
disable the wake function.
mode is selected.
Note: The unit equips with GRAD-U-
WAKE feature, the alarm tone vol-
ume will increase gradually to its
maximum in about 30 to 45 seconds.
Auto Dimmer
Slide the AUTO DIMMER switch at the back
of the unit to ON. The brightness of the
LED display will vary automatically
according to the environment.
Slide to OFF, the display will maintain at
the brightest level.
5
FWD
NAP
SLEEP
HOLD TO CANCEL
AUTO DIMMER
ON
OFF
4
6/21/01, 12:05 PM
EN