Related Manuals for Watchguard 970
Summary of Contents for Watchguard 970
- Page 1 WatchGuard® XCS Platform WatchGuard® XCS Platform Appliance Models: 970 and 1170 Quick Start Guide WatchGuard® Technologies, Inc.
- Page 2 WatchGuard® XCS Quick Start Guide...
- Page 3 • Go to http://www.watchguard.com/activate • Log in. NOTE: If you are new to WatchGuard®, follow the instructions provided at the URL above to create a profile. • Follow the instructions on the screen to enter your serial number and receive a feature key.
- Page 4 • Connect the power cord to the power socket on the back panel of the device. • To access the Web UI Setup Wizard, connect to the WatchGuard XCS using one of these methods: Connect your computer to the same network as the WatchGuard XCS through a network switch.
- Page 5 Next Steps Congratulations! You have finished the basic setup of your WatchGuard® XCS. You can use the Web UI to continue all configuration and management tasks. WatchGuard XCS Configuration • The XCS is initially configured for a deployment using a single interface on an internal network.
- Page 6 WatchGuard® XCS Quick Start Guide...
- Page 7 WatchGuard® XCS Quick Start Guide...
- Page 8 INTERNATIONAL SALES: +1.206.613.0895 © 2010 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Firebox, Fireware, Core, Peak, and LiveSecurity are either trademarks or registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other trademarks and tradenames are the property of their...
Need help?
Do you have a question about the 970 and is the answer not in the manual?
Questions and answers