RCA VR676HF User Manual page 33

Recording a Program
Recording While You're Away Recording While You're Away
Setting Up the Cable Box or RCA DSS ® Satellite Receiver
9.
Manually Controlled Cable Box: You are finished with
cable box setup. Press MENU•PROG to exit.
Remote Controlled Cable Box: Enter your cable box code
from the chart on page 16 and follow the on-screen
directions.
CABLE/DSS BOX SETUP
Please turn on the
cable box and tune it
to channel 2.
Press MENU to proceed
The VCR changes the cable box from channel 02 to channel
09 when you enter the correct code for your cable box. If
none of the codes work, the VCR does not control your
cable box.
Exit the menu system by following the directions on the
screen.
Important: If your cable box or RCA DSS ® satellite
receiver is not controlled by the VCR, turn on the cable
box or satellite receiver and tune it to the channel you
want to record before the recording is to begin.
CABLE/DSS BOX SETUP
Did the cable box
tune to channel 9?
1 YES, setup complete
2 NO, try another code
31