Pioneer SC-LX501 Manual page 50

> Specifications > Settings
Source
Make settings for input sources, such as volume difference adjustments for each input
selector for the connected equipment.
■ Input Volume Absorber
Adjust the volume level difference between the devices connected to the unit. Select the
input selector to configure.
Setting Item Default Value
Input Volume 0.0 dB
Absorber
■ Name Edit
Set an easy name to each input. The set name will be shown on the main unit display.
Select the input selector to configure.
Setting Item Default Value
Name Edit Input name
14
> Listening Modes > Playback Function
Setting Details
Select a value between "−12.0 dB" and "＋12.0
dB". Set a negative value if the volume of the target
device is larger than the others and a positive
value if smaller. To check the audio, start playback
of the connected device.
• This function is not effective in Zone 2.
Setting Details
1. Select a character or symbol with the cursors
and press ENTER.
Repeat it to input 10 or less characters.
"A/a": Switches between upper and lower
cases. (Pressing MODE on the remote
controller also toggles between upper and
lower cases)
"←" "→": Moves the cursor to the arrow
direction.
" ": Removes a character on the left of the cursor.
" ": Enters a space.
• Pressing CLEAR on the remote controller
will remove all the input characters.
2. After inputting, select "OK" with the cursors and
press ENTER.
The input name will be saved.
• To name a preset radio station, press TUNER on the remote controller, select AM/FM and select the
preset number.
• This cannot be set if the "NET", "USB" or "BT AUDIO" input is selected.
■ Audio Select
Select the priority for input selection when multiple audio sources are connected to one
input selector, such as connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD"
AUDIO IN jack. The setting can be separately set to each input selector. Select the input
selector to configure. Note that there are some default values you cannot change.
Setting Item Default Value
Audio Select BD/DVD:
HDMI
CBL/SAT:
HDMI
GAME:
HDMI
STRM BOX:
HDMI
HDMI 5:
HDMI
HDMI 6:
HDMI
AUX:
HDMI
CD:
COAXIAL
TV:
OPTICAL
PHONO:
Analog
> Basic Manual
Troubleshooting | Appendix
Setting Details
"ARC": When giving priority to input signal from
ARC compatible TV.
• The setting can be selected only when "System
Setup" - "Hardware" - "HDMI" - "Audio Return
Channel" is set to "Auto" and also the "TV" input
is selected.
"HDMI": When giving priority to input signal from
HDMI IN jacks
• The setting can be selected only when the input
is assigned to the HDMI jack in the "System
Setup" - "Input/Output Assign" - "HDMI Input"
setting.
"COAXIAL": When giving priority to input signal from
DIGITAL AUDIO IN COAXIAL jacks
• The setting can be selected only when the input
is assigned to the COAXIAL jack in the "System
Setup" - "Input/Output Assign" - "Digital Audio
Input" setting.
"OPTICAL": When giving priority to input signal
from DIGITAL AUDIO IN OPTICAL jacks
• The setting can be selected only when the input
is assigned to the OPTICAL jack in the "System
Setup" - "Input/Output Assign" - "Digital Audio
Input" setting.
"Analog": To always output analog audio
independently of the input signal
• The setting can be selected only when the input
is assigned to the AUDIO IN jack in the "System
Setup" - "Input/Output Assign" - "Analog Audio
Input" setting.