Cd Player - RCA RCD135 User Manual

CD player

Playing disc
This unit is compatible with audio CD-R/
CD-RW discs.
1. Press POWER/CD/RADIO/TAPE to enter CD
mode.
2. Press OPEN to open disc compartment
door.
3. Insert a disc with label face up.
4. Push CLOSE to close disc compartment door.
Total number of tracks on disc will show on
the display.
5. Press PLAY/PAUSE to begin CD playback.
6. Press TRACK/TUNE
next or previous track.
7. Press and hold TRACK/TUNE
for quick search of the current track.
8. Press DIGITAL VOLUME to adjust to the
desired listening level.
9. Press PLAY/PAUSE
Press again to resume.
Press STOP to end disc playback.
Tips: Tips: Tips:
Tips: Tips:
You may listen through headphones by
inserting one pair into PHONES
Repeating
Press REPEAT/PRESET once to repeat entire disc
and [REPEAT] icon will show on display.
Press REPEAT/PRESET twice to repeat current
track and a flashing [REPEAT] icon will show on
display.
Press REPEAT/PRESET a third time to turn off
repeat mode.
Remain/Clock
Press REMAIN/ to select between displaying
elapsed track time / remaining track time.
RCD135 EN
or to skip to the
or
to pause playback.
PHONES
PHONES PHONES
PHONES jack. PHONES
8
Random Playback
Press SHUFFLE / Mix to play tracks
randomly and a dice icon
display. Press again for de-selection.
Programming
When player is in stop mode,
1. Press SET with PROG. and TRACK(flashing,
indicating program position) shows on
display.
2. Press TRACK/TUNE or
track you want to store in the program.
3. Press SET. again to confirm your selection.
4. Repeat steps 2 to 3 to program to a
maximum of 20 tracks.
5. Press PLAY/PAUSE
start program playback (PROG. appears on
display).
Tip: Tip:
Tip: Tip: Tip:
If you are in normal playback mode but want
to play the saved program. Press STOP
SET SET SET and then PLAY SET SET PLAY PLAY. PLAY PLAY
Clearing program list
Your program will be erased once you open the
disc compartment door, change to another
source mode (e.g. radio, tape) or press STOP
in program mode.
Displaying the program list
1. While the CD player is stopped, press SET to
enter program mode.
2. Press SET repeatedly to review the program
list.
9/13/02, 10:06 AM
EN
appears on
to select the
in program mode to
STOP, then STOP STOP STOP
6