Notes on Assembly
• To install the BACK LIGHT UNIT, tighten the screws
for the LCD part in the order indicated by the numbers
shown on the right.
If not tightened correctly, it may cause LCD display
errors.
D. Remove the SPEAKER
D-1. Unsolder two lead wires.
D-2. Undo four screws and remove the SPEAKER.
<Left speaker>
Lead wire (White)
Lead wire (Green)
3
2
– 17 –
WK-240
6
7
4
5
8
1
<Right speaker>
Lead wire (Brown)
Lead wire (Blue)