Table of Contents
Advertisement
13.5 Adjusting the dish
Your appliance offers you a wide range of different
dishes. You can use the control ring to scroll through
the various selection lists.
Note: Once it has started, you can no longer change or
interrupt the dish and the settings.
Requirement: To start the operation, the cooking com-
partment must be cooled down.
Press
.
1.
Press "Assist".
2.
Press the required category.
3.
Press the required food.
4.
5.
Press the required meal.
a The settings for the dish appear in the display.
a For dishes with baking sensor operation, no settings
appear; a notification appears on the baking sensor.
Adjust the settings, if required.
6.
For some dishes, you can adjust the temperature
‒
and the cooking time, and for some dishes you
can adjust the weight instead. In baking sensor
mode, the appliance controls the settings auto-
matically.
For some dishes, you can also delay the end
‒
time.
→ "Setting the end time", Page 17
In order to get information about the accessory and
7.
shelf position, press "Tip".
Press to start.
8.
Note: During operation with the baking sensor, do
not open the appliance door. The baking result
would no longer be correct and the baking sensor
mode is terminated.
a The appliance starts to heat and the cooking time
counts down.
a No cooking time is displayed in baking sensor
mode. The time in the display shows how long the
programme has already been running.
14 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
14.1 Activating and deactivating the
childproof lock
You can activate and deactivate the childproof lock re-
gardless of whether the appliance is switched on or off.
Press and hold
for approx. 4 seconds to activate
1.
the childproof lock.
a If your appliance is connected to Home Connect,
the forecast cooking time is displayed in baking
sensor mode.
→ "Forecast for the duration of the operation",
Page 22
a Once the dish is ready, a signal sounds. The appli-
ance stops heating.
When the cooking time has elapsed:
9.
To stop the signal early, press any touch field.
‒
For some dishes, you can continue cooking if ne-
‒
cessary.
→ "Adding extra cooking time", Page 23
When the dish is ready, press
‒
pliance off.
Adding extra cooking time
For some dishes, the appliance offers the option to add
extra cooking time once the cooking time has elapsed.
You can do this as often as required.
If you do not want to continue cooking, press "End"
1.
and switch off the appliance using
To continue cooking the dish, press "Continue cook-
2.
ing".
a A cooking time appears in the display.
Use the control ring to change the cooking time, if
3.
required.
Press to start.
4.
a The appliance starts to heat and the cooking time
counts down.
a When the time has elapsed, a signal sounds. The
appliance stops heating. The notification to continue
cooking appears again.
When the cooking time has elapsed:
5.
To stop the signal early, press any touch field.
‒
If you want to continue cooking again, press
‒
"Continue cooking".
When the dish is ready, press "End" and use
‒
to switch the appliance off.
a A confirmation note appears on the display.
a The control panel is locked. The appliance can only
be switched off using
a When the appliance is on,
pliance is off,
does not light up.
Press and hold
for approx. 4 seconds to deactiv-
2.
ate the childproof lock.
a A confirmation note appears on the display.
Childproof lock en
to switch the ap-
.
.
lights up. When the ap-
23
Advertisement
Table of Contents
