RCA LAD 970 User Manual page 8

RP2360 FM 4/5/00 2:43 PM
EN
Page 8
THE CD PLAYER
SmartResume
When you stop CD play or power off the
unit (without disconnecting power sup-
ply), SmartResume is automatically activat-
ed. It stores all the current settings and
modes: current track, random play, time
display, Mode (Repeat/Repeat All/
Program), and ESPX. When play mode is
on again, the unit RESUMES to the set-
tings (unchanged) and plays from the
beginning of the track. If CD compartment
lid is opened, SmartResume stores only the
following modes: Shuffle Mode (Repeat/
Repeat All), EQ setting (Bass boost/
Surround) and ESPX. Other settings such as
track play, time display, program setting
and memory are all reset or cancelled.
Repeating
You can replay the entire CD or one
track as many times as you want;
Press MODE repeatedly to
1. Replay the entire disc;
2. Replay the current track;
3. Press repeatedly until no repeat or ran-
dom play icons show on display for de-
selection.
Scan Playing
Press MODE repeatedly until SCAN shows
on display. Each track will be played for
the beginning 10 seconds. For de-selec-
tion, press MODE repeatedly until no
repeat or random play icons show.
5
Program
This function lets you listen to the tracks
you selected in the order you want. The
CD player must be in Stop mode.
1. Press PROG. P will show on the display.
2. Select the track to be stored by pressing
& press PROG again to
or
confirm.
3. Repeat step 2 to store other tracks.
4. Press play button to listen to your pro-
gramming.
Note : The unit switches off automatically
after 15s if no key has been activated to
prevent excessive battery consumption.
During programming, the unit can switch
off if you do not press any key within 10s.
If the unit switches off, the programme
will be stored in memory. Resume pro-
gramming by turning the unit on again.
You can program up to 24 tracks.
1
To play your program again, press PLAY.
To add/edit tracks to the program, go to
stop mode ; press and hold PROG button
again. Refer to step 2 of the above.
To check the program, press PLAY and
.