Advertisement
Quick Links
5
3
0
1
The electric-motor-driven REED 5301PD Power Drive centers and
chucks pipe and conduit and rotates it while cutting, threading, and
reaming operations are performed. FORWARD (clockwise) rotation
can be selected with the REV/OFF/FOR switch.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED
INSIDE MAY RESULT IN ELECTRIC SHOCK, FIRE,
AND/OR SERIOUS PERSONAL INJURY.
910-55301
1117-55301
P
D
P
o
w
r e
D
r
v i
e
www.reedmfgco.com
Approved to
the latest United
States and CSA
Canadian
standards
Includes Footswitch.
Footswitch cord is 5' 6" (1676 mm) long.
O
p
r e
t a
r o
s '
M
a
n
u
l a
1
0416-55301
Advertisement
Related Manuals for REED 5301PD
Summary of Contents for REED 5301PD
- Page 1 States and CSA Canadian standards Includes Footswitch. The electric-motor-driven REED 5301PD Power Drive centers and chucks pipe and conduit and rotates it while cutting, threading, and Footswitch cord is 5’ 6” (1676 mm) long. reaming operations are performed. FORWARD (clockwise) rotation can be selected with the REV/OFF/FOR switch.
- Page 2 Work Area Safety Electrical Safety Personal Safety Tool Use and Care Service Foot Switch Safety Threading Machine Safety Machine Maintenance Description Specifications Accessories Installing Pipe in Power Drive Cutting Pipe with Hand Cutter Reaming Pipe with Hand Reamer Threading Pipe with Hand Threader Installing 05307 Carriage, Die Head, 05308 Reamer, and 05309 Cutter Cutting Pipe with 05309 Cutter Reaming Pipe with 05308 Reamer...
- Page 3 which have three- prong grounding plugs and three-pole receptacles which accept the tool’s plug. Use of other extension cords will not ground the tool and increase the risk of electrical shock. (see Chart). Insufficient conductor size will cause excessive overheating. Do not touch plugs or tool with wet hands.
- Page 4 The Operator’s Manual contains specific safety information Holding the and instructions for your protection against serious injuries work by hand or against your body is unstable and may including: lead to loss of control. Loss of fingers, hands, arms or other body parts if cloth- Use the correct tool for your applica- ing or gloves get caught in moving parts;...
- Page 5 Operator’s Manual on machine uses. Do not use power drives for other jobs including hole drilling, winch The REED 5301PD Power Drive is an electric-motor-driven power drive which centers and chucks pipe and conduit and turning, and making/breaking fittings. Other uses may in- crease the risk of injury.
- Page 6 (Figure 4) located on switch side. 2. Place 06150 Oiler (Figure 6) under threader and apply REED Thread Cutting Oil on pipe end. 3. Turn switch to FOR (forward) position. 4. Step on foot switch and push threader (Figure 4) with right hand to engage dies.