Pfaff tiptronic 6232 Instruction Manual page 74

Floral embroidery
For this flower arrangement, only a dense zig-
zag stitch was used in combination with the
variable stitch width and the various needle
positions.
- Apply iron- on backing or place silk backing
paperunderthefabri~
- Draw the contures of a flower motif with a
self-erasing textile pen.
- Set needle thread tension to "buttonhole",
select zigzag stitch G, set stitch length to
" buttonhole".
-Flowers:
Select center needle position @ and
embroider individual pedals. Regulate the
stitch width according to the contures of
the f lower with the width knob (34) during
sewing.
- Leaves:
Select right needle position
@
and
embroider half of the leaf. Vary the stitch
width using the width knob (34). Turn the
handwheel towards you after finishing the
first half of the leaf until the needle is posi-
tioned in the material.
- Turn the material 180 degrees and embroi-
der the other half of the leaf.
67
,..,
a
:I