Powering On/Off; Bluetooth Mode - Coby CPA91FD User Manual

Powering on/off

Turn the Power/Volume knob towards the right "ON" position to turn on the
speaker. Once the speaker is on, it will default to Bluetooth mode, and the RGB
light on the front panel will be on.
To turn off the speaker, turn the Power/Volume Knob to the "OFF" position,
and the RGB light will be off.

Bluetooth Mode

Bluetooth connection with your device
When the speaker is on, it will automatically enter Bluetooth pairing mode (If
the speaker is in other playback modes, repeatedly press the Mode button
until the Bluetooth indicator "BLUE" on the display screen quickly flashes red to
enter Bluetooth mode.). Turn on Bluetooth in your device's settings and search
for "CPA91FD '', then tap ''CPA91FD'' to connect.
Enter Bluetooth
pairing mode
Connected to a device
(Successfully paired
with your device).
NOTES: 1. Before pairing, ensure the speaker is not currently connected to another
device. If it is, press the
current connected device.
2. The speaker will automatically be paired with your last successfully connected
media device the next time it is turned on.
3. If there is no Bluetooth connection on the speaker for more than 5 minutes,
it will automatically turn off.
True Wireless Stereo connection
The CPA91FD supports True Wireless Pairing, which lets you stream your
music from your device to two CPA91FD speakers acting as left and right audio
channels for definitive and immersive stereo sound quality. To pair two speakers
together, follow the steps below:
1. Bring the two speakers next to each other, turn them on, and switch to
Bluetooth mode. Make sure neither speaker is connected to any other Blue-
tooth devices, such as your phone, tablet, or laptop. Then both the Bluetooth
indicators "BLUE" for the speakers flash red on the display screens.
2. Press and hold the
hear a tone notification. Both the Bluetooth indicators "BLUE" glow steady red on the
display screens, which means both speakers are paired with each other successfully.
3. Turn on your Bluetooth in your device's settings and search for ''CPA91FD",
then tap ''CPA91FD'' to connect. After they are successfully connected, you
can stream music from your phone to both speakers.
?
Quickly flashing red ("BLUE"indicator)
Bluetooth mode tone notification
Steady red (Status LED indicator)
Connected tone notification
button twice to unpair the speaker from the
button for about 5 seconds on either speaker until you
EN 02
?