Powering On/Off; Bluetooth Mode - Coby CSTW52FD User Manual

Charging
Charging
Fully charged
Charging time
Note: When the battery power level is low, the RGB light may not work, and the volume
will turn lower, indicating that it requires charging. When the speaker's battery power
gets used up, it will automatically power off.

Powering on/off

Slide the Power Switch to the "ON" position to turn on the speaker. Once the speaker
is on, it will default to Bluetooth mode, and the RGB light will be on,
To turn off the speaker, slide the Power Switch to the "OFF" position, and the RGB
light will be off.

Bluetooth Mode

Bluetooth connection with your device
When the speaker is on, it will automatically enter Bluetooth pairing mode (If the speaker is in
other playback modes, repeatedly press the Mode button until the status LED indicator quickly
flashes blue to enter Bluetooth mode.). Turn on Bluetooth in your device's settings and search
for ''CSTW52FD'', then tap ''CSTW52FD'' to connect.
Enter Bluetooth pairing mode
Connected to a device (Successfully
paired with your device).
NOTES: The speaker will automatically be paired with your last successfully connected
media device the next time it is turned on.
Micro USB cable
(included)
Steady red (Status LED indicator)
Off (Status LED indicator)
2 hours
?
?
Quickly flashing blue (Status LED indicator)
Bluetooth mode tone notification
Steady blue (Status LED indicator)
Connected tone notification
EN 02