Table of Contents
Advertisement
Reference
Glossary
The following is a list of terms used in this manual. There is also a glossary contained within the System Info menu
of your system.
Access Card
Identifies you to the system service providers and is required for your system to work. Do not remove the access
card except when a new card has been issued to replace the original.
Attractions
Previews of special programs broadcast by your program provider.
Audio Language
Refers to the different audio channels that may be broadcast in conjunction with a video program. A foreign
language translation is an example.
Azimuth
Refers to the left-to-right positioning of your satellite dish antenna. When you enter your zip code (or latitude
and longitude), the display screen provides the number corresponding to an azimuth setting for your location.
Channel Banner
Displays program information and menu items displayed as icons when you tune to a channel, exit a guide or press
INFO on the remote. Point to and select the icons to access the menu items.
Channel List
Allows you to select which channels can be viewed when the system is locked.
Dish Pointing
The dish antenna must be pointing directly to the satellites to receive the satellite signal. Obtain dish pointing
coordinates and check signal strength in the Dish Pointing menu screen.
Satellite Receiver
Receives, processes, and converts the digitally compressed satellite signals into audio and video.
Elevation
Refers to the up and down positioning of your satellite dish antenna. When you enter your zip code (or latitude
and longitude), the display screen provides the number corresponding to the elevation setting for your location.
Home Control
Home Control lets you remotely control several lamps and appliances through your receiver. To control these
devices, you must connect a Home Control base module to the receiver and a remote module to the device you
want to control.
Limits
The Ratings Limit allows you to control program viewing of rated programs by ratings level. The Spending Limit
controls spending on a cost-per-program basis. The Viewing Limit controls when and how many hours a user can
view programming. The Channel List allows you to select which channels can be viewed when the system is locked.
Locks
The means of restricting access to certain features of the system. The lock is controlled by a 4-digit password. The
closed or open lock icon in the channel marker indicates whether your system is locked or unlocked.
66
Advertisement
Table of Contents
