Connection C (Good Picture And Sound Quality) - RCA DRD112NW User Manual

Connecting the DSS Receiver
Connection C
(Good Picture and Sound Quality)
To use this connection you must have:
l
TV with RF input (jack)
l
VCR with RF input and output
l
Coaxial cables
To connect TV, VCR, and antenna or cable box.
1. Connect coaxial cables as shown.
44
To receive satellite programming:
1. Set DSS receiver CH3/4 switch to CH3 or CH4
(whichever is not being broadcast in your area.)
2. Turn VCR off (or press VCR' s TV/VCR button).
3. Tune TV to whichever channel you set the DSS receiver 3/4
switch to in Step 1.
To receive off-air programming (no cable box):
1. Turn DSS receiver off (or press TV/DSS button).
2. Turn VCR off (or press VCR' s TV/VCR button).
3. Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn DSS receiver off (or press TV/DSS button).
2. Turn VCR off (or press VCR' s TV/VCR button).
2. Tune TV to cable box output channel
(usually CH2, CH3, or CH4).
3. Tune cable box to desired channel.
To record satellite programming:
1.
2.
3.
4.
5.
Set DSS receiver CH3/4 switch to CH3 or CH4
(whichever is not being broadcast in your area.)
Tune VCR to DSS output channel
(whichever channel you set the DSS receiver to in Step 1).
Tune TV to receive VCR output channel (usually CH3 or CH4).
Tune DSS receiver to desired channel.
Set VCR to record.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
Note: You can use your stereo amplifier line input to hear stereo using this connection.
See your stereo amplifier' s Owner' s Manual for specific information.