Advertisement
DMX Splitter
with RDM Support
Instruction Manual
Models:
DSR10-RDM-3, DSR10-RDM-5
DSR10-RDM-C
version 1.0 since 3 February 2020
ATTENTION!
This instruction manual contains important information about the installation and the use of
the equipment. Please read and follow these instructions carefully.
Always ensure that the power to the equipment is disconnected before opening the
equipment or commencing any maintenance work.
DSR10-RDM_en_manual_M070
( 1 / 4)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SRS Labs DSR10-RDM-3
Summary of Contents for SRS Labs DSR10-RDM-3
- Page 1 DMX Splitter with RDM Support Instruction Manual Models: DSR10-RDM-3, DSR10-RDM-5 DSR10-RDM-C version 1.0 since 3 February 2020 ATTENTION! This instruction manual contains important information about the installation and the use of the equipment. Please read and follow these instructions carefully.
- Page 2 IMPORTANT SAFETY INFORMATION The following general safety precautions have to be observed during all phases of operation, service, and the repair of this equipment. Failure to comply with these precautions or with specific warnings in this manual violates safety standards of design, manufacture, and the intended use of this equipment.
- Page 3 Controls and indication Power indication 2. DMX input signalization 3. DMX input connector channel A 4. DMX Termination switch 120R + signalization LED 5. RDM filter switch + signalization LED 6. DMX data output signalization for positive and negative signal 7.
- Page 4 Technical data Package consists of: Main: • DSR10-RDM unit, AC 100-255V / 50-60Hz / 10W • 1.5m 3G0.75mm2 PowerCon cable, Input/ Output: • Printed manual 1x USITT DMX512 / RDM 10x USITT DMX512 / RDM amplified Warranty: Life-time warranty Size: 1U, 19’’, 482.5 x 44.5 x 130 mm Weight: 2.1 kg...
Need help?
Do you have a question about the DSR10-RDM-3 and is the answer not in the manual?
Questions and answers