Subscribe to Our Youtube Channel
Related Manuals for SRS Labs CSE-07D
Summary of Contents for SRS Labs CSE-07D
- Page 1 Circle Surround Digital Encoder ® U S E R ’ S M A N U A L Model CSE-07D www.srslabs.com This product is manufactured by SRS Labs, Inc. P00192 V2.0...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
-
Page 3: Table Of Contents
Technical Support Warranty Information Company Information: SRS Labs is a recognized leader in the advancement of audio and voice technology. The company works with the world’s top manufacturers to provide a richer entertainment experience through patented sound techniques. SRS Labs’... -
Page 4: Introduction
Sound designers, mixers and facilities creating multichannel audio content will find the CSE-07D to be the most flexible and powerful encoding solution available. Surpassing the limitations of previous matrix encoders, the CSE-07D Circle Surround Encoder supports current multichannel material, accepting up to 6.1 channels of discrete audio input for... -
Page 5: Front Panel
Front Panel (Quick Reference) 1. Input Signal Presence Indicators 5. Bass Manage Mode Button and LED 2. Sample Rate LEDs 6. Test Mode Button and LED 3. Sync Source Button and LED 7. Output Signal Level Meters 4. AES Status LEDs 8. -
Page 6: Rear Panel
Rear Panel (Quick Reference) 1. Pair 4 (Cs) Input 6. Digital (Lt/Rt) Output 2. Pair 3 (Ls/Rs) Input 7. Serial port 3. Pair 2 (C/LFE) Input 8. Analog Right Total Output 4. Pair 1 (L/R) Input 9. Analog Left Total Output 5. -
Page 7: Cse Setup
CSE-07D Set-up: Placement and Use: The CSE-07D encoder is designed to take the stems from your surround mix and pass them onto a recording or broadcast device matrixed into a left total and right total stereo signal. Install the CSE-07D after your mixing console, and before your monitoring device, recording device or transmission path. -
Page 9: Cse Operation
CSE-07D Operation (see front panel image on page 4) 1. Input Signal Presence: Displays signal presence and clip on corresponding input channels. When the LEDs glow green on the front panel, the corresponding channel is receiving a signal > -44 dBFS at the input. -
Page 10: Specifications
Specifications Frequency Response: 20 Hz – 20 kHz (+/- 1 dB for analog out) (L, R, C, Ls, Rs, Cs, Ls); 20 Hz to 80 Hz (LFE) Inputs (digital only): 4 balanced XLRs (L/R, C/LFE, Ls/Rs, Cs); input level per AES3 standards Input Impedance: 110 Ω... -
Page 11: Technical Support
© 2005 SRS Labs, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means whatsoever, without express written consent from SRS Labs, Inc. -
Page 12: Warranty Information
SRS Labs, Inc. hereby warrants to the original purchaser of this product that it is free of manufacturing defects in material workmanship. Parts: For ONE-YEAR from date of original purchase at retail, we will repair or replace, at our option, any defective part without charge for the part. Parts used for replacement are warranted for the remainder of the original warranty.
Need help?
Do you have a question about the CSE-07D and is the answer not in the manual?
Questions and answers