The Lex Extender (Lex) - Intelix USB 2.0 DIGI-USB2 User Manual

The LEX (LEX)
The LEX connects to the computer using a standard USB cable (included). Power for the LEX is provided
by the host computer. Power for the REX is provided by the 24V AC adapter connected at either the LEX
or REX. The LEX delivers power over the CAT 5e/6/7 extension link to the REX when the included power
supply is connected to the LEX.
ITEM TYPE
1 Power LED (Green)
2 Link LED (Green)
3 Host LED (Green)
4 Activity LED (Green)
5 Mode
6 Config Port
7 USB Port
8 Power Port
9 Link Port (RJ45)
DESCRIPTION
LED turns on when power is supplied.
LED is off when no power is supplied by the host computer.
Indicates a valid ExtremeUSB link is established between the LEX and REX.
LED turns on when link between the LEX and REX is established.
LED is off when there is no link between the LEX and REX. LED is slow
blinking when the unit is attempting to establish a link.
Indicates that the extender system is properly enumerated on the host
computer.
LED blinks when the extender system is in a suspended state.
Indicates data transmission is occurring between the LEX and REX.
LED blinks intermittently with or without a USB device connected.
When the LEX and REX are in suspend mode, the LED is off.
Reserved for manufacturer use.
Reserved for manufacturer use.
Used to connect the LEX to the host computer. Accepts USB Type B
connector.
Connects to the AC power supply.
Accepts RJ45 connector for CAT 5e/6/7 cabling to connect the LEX to the
REX.
Page 5 of 13