Contents Getting Started ......................3 Package Contents ....................3 Installing the Monitor Stand ................... 4 Adjusting the Monitor ..................... 6 Monitor Overview ....................8 Connecting the Monitor to PC ................11 Connecting the Monitor to PC ................12 OSD Setup ........................13 OSD Keys ......................
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents G271C E2 G271CQP E2 Monitor G321C E2 G321CQP E2...
2. Tighten the stand bracket with screws. 3. Connect the base to the stand and tighten the base screw to secure the base. 4. Make sure the stand assembly is properly installed before setting the monitor upright. G271C E2/ G321C E2 Getting Started...
Page 5
G271CQP E2/ G321CQP E2 ⚠ Important Remove the screws on the monitor groove if needed before installing the stand. ∙ Place the monitor on a soft, protected surface to avoid scratching the display panel. ∙ ∙ Do not use any sharp objects on the panel. The groove for installing the stand bracket can also be used for wall mount.
This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ Important Avoid touching the display panel when adjusting the monitor. ∙ ∙ Please slightly tilt the monitor backwards before pivoting it. G271C E2/ G321C E2 -5° 20° Getting Started...
Page 10
OSD Keys Power Button / Power LED Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode. Kensington Lock HDMI Port DisplayPort Headphone Jack Power Jack...
3. Connect the power cord to the monitor power jack. (Figure A) 4. Plug the power cord into the electrical outlet. (Figure B) 5. Turn on the monitor. (Figure C) 6. Power on the computer and the monitor will auto detect the signal source. G271C E2/ G321C E2 Getting Started...
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer.Assemble the external power supply & power cord. (Figure A) 3. Connect the external power supply to the monitor power jack. (Figure B) 4.
OSD Setup ⚠ This chapter provides you with essential information on OSD Setup. Important All information is subject to change without prior notice. OSD Keys The monitor comes with a set of OSD Keys that help to control the On-Screen Display (OSD) menu.
OSD Menus G271C E2/ G321C E2 G271CQP E2/ G321CQP E2 ⚠ Important When receiving HDR signals, Night Vision, MPRT, Low Blue Light, HDCR, Brightness, Contrast, Color Temperature and PIP/PBP will be grayed out. OSD Menus...
Gaming 1st Level Menu 2nd/3rd Level Menu Description Game Mode User ∙ Use Up or Down Button to select and preview mode effects. ∙ Press the E Button to confirm and apply your mode type. Racing Night Vision ∙ This function optimizes background brightness and is recommended for Normal FPS games.
Page 16
1st Level Menu 2nd/3rd Level Menu Description Refresh Rate Location Left Top ∙ Location is adjustable in OSD Menu. Press the E Button to confirm and Right Top apply your Refresh Rate Location. ∙ This monitor follows and works at the Left Operating System’s preset Screen Bottom...
1st Level Menu 2nd/3rd Level Menu Description Screen Icon ∙ Users can adjust Screen Assistance Assistance in any mode. (G271C E2/ G321C E2) Screen None ∙ Users can adjust Screen Assistance Assistance in any mode. Icon (G271CQP E2/ G321CQP E2)
Page 18
1st Level Menu 2nd Level Menu Description Low Blue Light ∙ Low Blue Light protects your eyes against blue light. When enabled, Low Blue Light adjusts the screen color temperature to a more yellow glow. ∙ When Pro Mode is set to Anti-Blue, it is mandatory to enable Low Blue Light.
Image 1st Level Menu 2nd/3rd Level Menu Description Brightness 0-100 ∙ Properly adjust Brightness according to the surrounding lighting. ∙ Brightness will be grayed out when MPRT or HDCR are enabled. Contrast 0-100 ∙ Properly adjust Contrast to relax your eyes. Sharpness ∙...
Auto Scan ∙ Users can use the OSD Key to select Input Source at below status: • While “Auto Scan” is set to “OFF” with the monitor at power saving mode; • While “No Signal” message box is shown on the monitor. PIP/PBP (G271CQP E2/G321CQP E2) 1st Level Menu...
Navi Key 1st Level Menu 2nd Level Menu Description Enter / Left / ∙ All Hot Key items can be adjusted via OSD Right Menus. Brightness Game Mode Screen Assistance Alarm Clock Input Source PIP/PBP Mode (G271CQP E2/ G321CQP E2) Refresh Rate Info.
Setting 1st Level Menu 2nd Level Menu Description Language 繁體中文 ∙ Users have to press the E Button to confirm and apply the Language setting. English ∙ Language is an independent setting. Users’ own language setting will override Français the factory default. When users set Reset to Yes, Language will not be changed.
Page 23
1st Level Menu 2nd Level Menu Description ∙ To overclock the monitor refresh rate, OverClocking users have to set DP OverClocking to ON. HDMI CEC ∙ HDMI CEC (Consumer Electronics Control) supports Sony PlayStation®, Nintendo® Switch™, Xbox Series X|S consoles and various audio-visual devices that are CEC- capable.
Specifications G271C E2 Model G271CQP E2 G321CQP E2 G321C E2 Size 27 inch / 31.5 inch Curvature R1000 Panel Type Resolution 1920 x 1080 2560 x 1440 Aspect Ratio 16:9 Brightness (nits) 300 (typ.) 250 (typ.) Contrast Ratio 3000:1 2500:1...
Preset Display Modes ⚠ Important All information is subject to change without prior notice. G271C E2 G271CQP E2 G321C E2 G321CQP E2 Standard Resolution HDMI HDMI Full HD 1920x1080 @60Hz @120Hz @144Hz @165Hz @170Hz 2560x1440 @60Hz @120Hz @144Hz @165Hz @170Hz...
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly installed. • Check if the computer and monitor are connected to electrical outlets and are turned on.
∙ Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ∙ If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Page 29
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/ Environment ∙ To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com...
Page 32
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.