Wake-Up Timer; Sleep Timer - RCA T20062BC User Manual

Rca t20062bc: user guide
Table of Contents

Advertisement

Using the TV/VCR Features
Using the TV/VCR Features

Wake-Up Timer

The timer turns the TV/VCR on to the channel you select in the menu
at the desired time. You can set it to wake you up in the morning or
remind you that a favorite program is about to start. The TV/VCR
will turn on for an hour and then automatically turn off.
To Set the Wake-Up Timer
1. Press MENU to display the TV/VCR MAIN MENU.
4. Use the number buttons on the remote to enter the channel
To Cancel the Wake-Up Timer
Follow steps 1-3 above, press RESET to cancel the timer, and then
press MENU to exit.
The timer is canceled if MENU is pressed before step 4 above is
completed.

Sleep Timer

1.
2.
2. Press 3 to display the TIME menu.
3. Press 3 to display the WAKE-UP TIMER menu.
number and time.
• After you enter the time, press 1 for AM or 2 for PM. Example:
press 0, then 5, then 0, then 7, then 2, for a time of 5:07PM.
• Press CLEAR to correct an entry or press RESET to cancel
the timer.
5. Press MENU to set the timer.
• If set, the wake-up timer will turn on the TV/VCR every day.
The WAKE-UP indicator on the front of your TV/VCR will
light to show the timer has been set. (This indicator turns off
during wake-up mode.)
6. After the timer turns on your TV/VCR, you can turn off the set
using the remote's OFF button or the POWER button on the
TV/VCR's front panel. If you do not turn off your TV/VCR, it
will automatically turn off after one hour. If you do not want the
TV to turn off, cancel the wake-up timer as described below.
The sleep timer automatically turns the TV/VCR off after 30, 60, 90,
or 120 minutes.
Repeatedly press SLEEP. Each press of the SLEEP button
changes the amount of time as shown below.
Sleep Timer 0:00
• If the sleep timer has already been set, the remaining time
before the TV/VCR turns off is displayed on the screen.
To cancel the sleep timer, repeatedly press SLEEP until 0:00 is
displayed on the screen.
You can also set the sleep timer from the TV/VCR MAIN MENU.
• Display the TIME menu as shown above and press 2. Follow
the directions on the screen. Press SLEEP or CHAN
change the amount of time. Press MENU to exit.
Press SLEEP Amt. of Time
Twice
30 Minutes
Three Times
1 Hour
Four Times
90 Minutes
Five Times
2 Hours
Six Times
Timer Off
or
to
TV/VCR MAIN MENU
1 Timer Recordings
2 Picture Quality
3 Time
TIME
1 Set clock
2 Sleep timer
3 Wake-up timer
WAKE-UP TIMER
Channel --
--:-- __
Time
WAKE-UP TIMER
Channel 12
Time
05:07 AM
Press CLEAR to correct
Press RESET for --:--
Press MENU to set
11

Advertisement

Table of Contents
loading

Table of Contents