Using The Menu System; Sound Menu - RCA R52WM24 User Manual

Using the Menu System

Go back
Sound settings
Sound type
Sound mode
Sound logic
Dynamic bass
Headphone settings
Graphic equalizer
Go back
Left & Right balance
Amplifier
Subwoofer
32

Sound Menu

...
The Sound menu lets you adjust audio output. To access the Sound menu, press
Stereo...
Normal...
MENU on the remote, and then select Sound from the main menu.
Medium...
This section describes the items available in the Sound menu.
...
...
Sound settings The Sound settings submenu contains the following items:
Left & Right balance Use the left or right arrow button to center the bar Left & Right balance Use the left or right arrow button to center the bar Left & Right balance
under the arrow to balance the left and right speakers.
Amplifier Use the left or right arrow button to select Amplifier Use the left or right arrow button to select Amplifier
External...
Monitor is using external amplifier only) or Internal (if your HD Monitor is
External...
using the speakers in the HD Monitor).
Subwoofer Set the HD Monitor's subwoofer to Subwoofer Set the HD Monitor's subwoofer to Subwoofer
is using an external subwoofer; or None.
Sound type Press the right arrow button to scroll through the available audio
types, which control the way the sound comes through your speakers. The
options available vary according to the input selected.
Stereo Splits the incoming stereo audio signal into left and right channels.
Most TV programs and recorded materials have stereo audio. The word
Stereo appears in the channel banner when you tune to a program that is
broadcast in stereo.
Left and Left Left and
audio.
Sound Mode Press the right arrow button to scroll through the available audio
modes, which provide special processing through your speakers (depending on
the setting you chose as your Sound type).
Normal Normal Normal
or stereo sound provided by the signal you're watching.
Wide Wide Available only for mono signals. "Widens" sound from mono Wide Available only for mono signals. "Widens" sound from mono
broadcasts and mono devices connected to your HD Monitor for a fuller,
more spacious sound.
Magic Available only for stereo signals. Gives a surround effect with more Magic Available only for stereo signals. Gives a surround effect with more Magic
bass.
Sound logic Reduces the annoying blasts in volume during commercial
breaks, and also amplifies softer sounds in program material. Eliminates the
need to constantly adjust the volume.
Dynamic bass Enhances your HD Monitor's low-frequency response. The
options are Off,
Sound settings submenu contains the following items:
Sound settings
type type Press the right arrow button to scroll through the available audio
Right Isolates either the left or right channel of the incoming Right Right Isolates either the left or right channel of the incoming
Mode Press the right arrow button to scroll through the available audio Mode
Sound type Sound type).
Does not give any special processing, simply provides the mono Does not give any special processing, simply provides the mono
logic Reduces the annoying blasts in volume during commercial logic
Off Medium and High. Off,
External (if your HD
External, if the HD Monitor
Chapter 4