Parts Identification; Prior To Use - HoMedics duo QUARTZ Instruction Manual

IB-IPLHH300GB-0116-01.qxp_Layout 1 11/01/2016 09:05 Page 5

PARTS IDENTIFICATION

Pulse button
Level Indicator lights –
illuminated blue for AFT
(level 1-3) / illuminated
white for IPL (level 4 & 5)
Power Button

PRIOR TO USE

Duo Quartz set-up
1. Remove all components from the box
2. Plug the power cord to the applicator handset.
3. Only after connecting the power cord to the applicator handset, insert the plug into the electrical outlet.
4. On connecting the power, the blue/white skin level indicator lights will flash on and turn off, the green
status light will then begin flashing.
SPOT TEST
The spot test is intended to determine your skins reaction to the AFT/IPL treatment and help you select the
optimal energy level for each treatment area.
Do a spot test on each area you intend to treat 48 hours prior to the full treatment.
1. Prior to use, make sure your skin is shaved, clean and dry (free of any residue such as powders, creams,
make-up, anti-perspirants or deodorants).
Warning NEVER use flammable liquids such as alcohol or acetone to clean the skin before using the IPL
device.
2. Set up the device following the instructions above.
3. Place the applicator treatment window on the required test area with full contact to the skin.
Power adaptor socket
5
Treatment Window
Status Indicator LED –
illuminates green
Facial adaptor