RCA P60820 User Manual page 21

Interactive Setup
YES
TV GUIDE Plus+
Setup
Do you have a cable box?
6. Select YES if you have a cable box, or NO if you do not.
ENTER CANCEL
TV GUIDE Plus+
Setup
Turn on cable box
Enter cable box brand # from
brand table in your manual
= =
7. Enter the code for your cable box's brand from the table on
the following pages.
When the TV GUIDE Plus+ system correctly identifies the brand
and model of your cable box, the cable box changes to channel 9.
YES
TV GUIDE Plus+
Setup
Testing code
Has your cable box
switched to channel 9?
8. Select YES if the cable box changed to channel 9, or NO if it
did not. If you select NO, the system will try another code.
Once the correct model of cable box has been identified, you will
need to set the cable box's output channel.
NO
EXIT
NO EXIT
1 2 – 0 1
When TV Guide Plus+ cannot
recognize either your cable box or
VCR after several tries, a screen
reading, "Cable Box (VCR) test
failed... Please consult manual and try
again" appears. If this happens, you
should:
• Double check the codes listed in the
tables. Try entering another.
• Check to make sure the IR
controllers are positioned correctly.
19